guage cluster info..
03-02-03, 09:21 PM
#1
Zoom Zoom Boom
Thread Starter
guage cluster info..
Is there anyway to use the stock guage cluster and put in after market more acurate guages in? like using the same spots, but sliding a different guage in the plastic circles. like autometer's and stuff? does anyone knwo what im talking about?
03-03-03, 09:57 AM
#2
Ex fd *****
It can be done BUT its is a lot of work - The Stock instruments are not indvidual units but are all integretated into a single cluster behind the faces. Gordon Monsen posted a bunch of info about this subject about a year ago, maybe you should search for it.
03-03-03, 06:31 PM
#3
Zoom Zoom Boom
Thread Starter
rigthi understand that but i what i mean is that when you pull all the guages behing out, will i be able to fit some autometer's in those circles? or will i have to mod it a little bit? im just tryign to find out if it will be a perfect fit for some 2 1/16 and like im guessing a 3 3/8 -5" tach and speedo..but im sure if not i can find something that would fit in there right?
thanks for the info though.. what was his screen name here?
thanks for the info though.. what was his screen name here?
03-04-03, 10:54 AM
#4
Ex fd *****
Originally posted by GeTCrAzYKiD
rigthi understand that but i what i mean is that when you pull all the guages behing out, will i be able to fit some autometer's in those circles? or will i have to mod it a little bit? im just tryign to find out if it will be a perfect fit for some 2 1/16 and like im guessing a 3 3/8 -5" tach and speedo..but im sure if not i can find something that would fit in there right?
thanks for the info though.. what was his screen name here?
rigthi understand that but i what i mean is that when you pull all the guages behing out, will i be able to fit some autometer's in those circles? or will i have to mod it a little bit? im just tryign to find out if it will be a perfect fit for some 2 1/16 and like im guessing a 3 3/8 -5" tach and speedo..but im sure if not i can find something that would fit in there right?
thanks for the info though.. what was his screen name here?
The small guage facess on the fd are very close to 2 1/16 guages
I don't know about the Tach and Spedo sizes.
Check Max Cooper's site ( www.maxcooper.com ) he recently posted a page about installing some SPA dual digital guages in place of the stock water temp & oil press guages.
Gordon was Gmonsen or Gmonsen2 on the forum
03-06-03, 07:49 PM
#6
Senior Member
Join Date: Apr 2001
Location: Darien CT
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
i assume your talking about putting them in an FD. yes it can be done. actually mounting the gauges isn't that hard. if you want to go all out you could try wiring the gauges into the stock harness then replacing the sensors at the other end. might be the easier than running all those new wires,one of the only companies i could find (and i looked for al ong time) that had everything was autometer. Defi has everything but a speedo, at least last i checked
03-07-03, 09:32 PM
#7
Zoom Zoom Boom
Thread Starter
im talkign about for an FC, sorry i havent said but i mean im making sortof a drag project and i wanted to get some more accurate guages so i figured hey, might aswell just change them all out..so i though id ask before i wrecked everything lol thanks for your help tho..
Trending Topics
03-08-03, 12:08 AM
#8
Junior Member
Join Date: Nov 2002
Location: Los Angeles
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
03-10-03, 07:43 PM
#10
Learned alot | Alot to go
iTrader: (2)
Join Date: Apr 2002
Location: Rotaryland, New Hampshire
Posts: 4,232
Likes: 0
Received 0 Likes
on
0 Posts
re-ameryia sells replacemnt gages that fit in the cluster like a 200mph speedo and a 10k tach, probly others too, been a while sence ive been there