FD 18 x 10 wheels for track
10-14-22, 07:51 PM
#26
Yeah, the 18x11 +45 is the limit of what I could do with stock available front camber and a roll w/ slight pull up front for 295s -315s.
At 25.5" ride height that is front -2.5 camber which is a lot for the street, good for the track and not enough for autox.
Rear I had at minimum camber and a lip partially rolled, so could do it with camber and no roll.
At 25.5" ride height that is rear -1.4 camber.
You dont want tires that stick out past the body at the bottom, it tears up your paint (hence my kydex mudflaps).
I would do at most the 18x10 +50 and 285/30-18 with minimal camber and factory mudflaps for a street FD with nice paint and no trips to track planned.
At 25.5" ride height that is front -2.5 camber which is a lot for the street, good for the track and not enough for autox.
Rear I had at minimum camber and a lip partially rolled, so could do it with camber and no roll.
At 25.5" ride height that is rear -1.4 camber.
You dont want tires that stick out past the body at the bottom, it tears up your paint (hence my kydex mudflaps).
I would do at most the 18x10 +50 and 285/30-18 with minimal camber and factory mudflaps for a street FD with nice paint and no trips to track planned.
The following users liked this post:
Narfle (10-15-22)
Thread
Thread Starter
Forum
Replies
Last Post
Flyweight
Suspension/Wheels/Tires/Brakes
659
02-09-24 04:27 PM
scarified
Suspension/Wheels/Tires/Brakes
22
08-11-14 05:51 PM
Wuppy
Suspension/Wheels/Tires/Brakes Archive
51
11-11-02 04:18 PM