I’m building an 84 Rx7 12a Ep car and it is almost completed, so I put it on the scales this weekend and not sure what is going on. The left front was heavy and the left rear was light so I moved the battery to the left rear but when I did that the right rear gained weight not the left. So I move the battery to the right rear and everything worked out, almost 50-50 all the way around. So my question is does the watts link work like a sway bar (by the way the front and rear sway bar are removed). This is not my first car that I put on the scales but this is the first one acted like this. Any Help would be good.

Thanks
Bill
RX7 EP #95

 

Are you sure you don't have the scales hooked up backwards?

 

I did not plug the scales in, so I'm going to check that tonight. I hope that is the problem. I guess I'm getting old and I should have check that. I will let you know if that was the problem.

Thanks

 

I found the problem a bad cable, after repairs the car weight out OK.