13b N/A port timing need help
#1
Full Member
Thread Starter
Join Date: Sep 2008
Location: Finland
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
13b N/A port timing need help
Hello,
Can some one help me with the port timin?
I build n/a 13b engine with Peripheral Port. My target is 300hp
I found these timings, what you think?
Mazda Factory Peripheral Port:
IO 86� BTDC
IC 75� ABDC
EO 73� BBDC
EC 65� ATDC
IO = Intake opens
IC = Intake closes
EO = Exhaust opens
EC = Exhaust closes
Can some one tell me good serious racing timings?
I apologize for the bad english language.
Please send pm or answer here.
Can some one help me with the port timin?
I build n/a 13b engine with Peripheral Port. My target is 300hp
I found these timings, what you think?
Mazda Factory Peripheral Port:
IO 86� BTDC
IC 75� ABDC
EO 73� BBDC
EC 65� ATDC
IO = Intake opens
IC = Intake closes
EO = Exhaust opens
EC = Exhaust closes
Can some one tell me good serious racing timings?
I apologize for the bad english language.
Please send pm or answer here.
#2
Moderator
iTrader: (3)
well, RB claims their housings can achieve 300 and from what i've read they're a little softer on power than the MFR housings, so theoretically if you use the MFR timings to build your housings, then you should achieve your goal.
if you're looking to go with custom timings, then i'm not sure how much help you're going to get on the forum. you will probably end up having to find a rotary engine builder that you can contact personally and then discuss it from there.
have you seen this?
https://www.rx7club.com/rotary-car-p...144200/page10/
if you're looking to go with custom timings, then i'm not sure how much help you're going to get on the forum. you will probably end up having to find a rotary engine builder that you can contact personally and then discuss it from there.
have you seen this?
https://www.rx7club.com/rotary-car-p...144200/page10/
#3
Full Member
Thread Starter
Join Date: Sep 2008
Location: Finland
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
well, RB claims their housings can achieve 300 and from what i've read they're a little softer on power than the MFR housings, so theoretically if you use the MFR timings to build your housings, then you should achieve your goal.
if you're looking to go with custom timings, then i'm not sure how much help you're going to get on the forum. you will probably end up having to find a rotary engine builder that you can contact personally and then discuss it from there.
have you seen this?
https://www.rx7club.com/rotary-car-p...144200/page10/
if you're looking to go with custom timings, then i'm not sure how much help you're going to get on the forum. you will probably end up having to find a rotary engine builder that you can contact personally and then discuss it from there.
have you seen this?
https://www.rx7club.com/rotary-car-p...144200/page10/
i send e mail to racing beat. maybe they can help.
iI found a few timings on the Internet.
Turbo Peripheral Porting - Xtreme Auto Parts
#4
Full Member
Thread Starter
Join Date: Sep 2008
Location: Finland
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
well, RB claims their housings can achieve 300 and from what i've read they're a little softer on power than the MFR housings, so theoretically if you use the MFR timings to build your housings, then you should achieve your goal.
if you're looking to go with custom timings, then i'm not sure how much help you're going to get on the forum. you will probably end up having to find a rotary engine builder that you can contact personally and then discuss it from there.
have you seen this?
https://www.rx7club.com/rotary-car-p...144200/page10/
if you're looking to go with custom timings, then i'm not sure how much help you're going to get on the forum. you will probably end up having to find a rotary engine builder that you can contact personally and then discuss it from there.
have you seen this?
https://www.rx7club.com/rotary-car-p...144200/page10/
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM