ok i wanted to know what wires needed to be removed? i got mine used and it didnt come with anything.and i figured some1 on this forum would know. thanks, jason

 

Some stores have them out already, should call them and ask, some people pull the pins, some buy the extention for the power fc and cut those, some cut and cap this wires, is your car and should be your choice, but pick the smart one



here is the link of the extention
http://www.autosportwiring.com/products.htm#Mazda

 

thank you so very much.that was a great and easy chart to read.thanks, jason

 

related question, if those wires are for emissions (egr) and mine are removed, do i still need to cut these wires or no?

 

From my notes, I think this view is better!

 

you guys are great. thanks, jason

 

I did not have any need to remove wires/pins but then at teh time I didn't use the A/C.

 

What is pin 4C in the diagram in the 2nd post? Should it be removed or only the 3 on the 26pin and 1 on the 16 pin that are labled below the diagram?

 

DAPDAS

 

what is the purpose of cutting these 4 wires? just curious, no one would ever tell me.

 

^ your car won't run smoothly, try it with him in first and you'll see. i'd recommend taking out the pins on the harness plug or cutting the pins directly on the ECU (not cutting the wires on the harness directly)