Power FC T88 and Power FC with 26psi, anyone out there using this?

Closed Thread Subscribe

Thread Tools

Search this Thread

07-25-01, 07:25 PM

RX794

NYC's Loudest FD

Thread Starter

Join Date: Mar 2001

Location: Long Island, NY

Posts: 1,539

Likes: 0

Received 1 Like on 1 Post

T88 and Power FC with 26psi, anyone out there using this?

Got 2 questions for everyone: #1 Is there anyone out there that is using the Power FC with a T88 and has gone over 26psi?, #2 How are you supplying additional fuel, as far as injectors go, are you using a AIC or some type of additional injector contrioller (due to the fact that you need about 6400cc total of injector to run that much psi)?

07-27-01, 09:02 AM

Dingle Berry

Passenger

Posts: n/a

I got the PFC with my T88.....I have 850 primaries and 1200 secondaries.....Havent really got a chance to run high boost yet though.........

08-11-01, 08:43 PM

CPunla

Passenger

Posts: n/a

I have the Apexi PFC and the T-88 set up. 550's on the front and 1600's in the rear.--- (with a profec B)---
I thought that no matter what you do, the stock map sensor will not let you go beyond 1 bar. How is 26 psi possible?

08-12-01, 01:59 PM

RX794

NYC's Loudest FD

Thread Starter

Join Date: Mar 2001

Location: Long Island, NY

Posts: 1,539

Likes: 0

Received 1 Like on 1 Post

It's possible because if you use an AIC, with extra injectors, and the proper fuel pump,lines, etc. that reads boost till 2 bar(29.4psi), then you can just turn the boost up past the Power FC fuel specs, as far as ignition goes, it flatlines after like 17psi anyway, so that doesn't matter, that's how you can run more boost with a Power FC. Any more questions class?