Power FC Power FC question.
01-11-05, 08:55 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Highland, New York
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Power FC question.
I just received my Power FC from Japan, and low and behold, the instructions are japanese (big surprise). I ordered the new comp because I put 1600cc injectors in the car. For some reason, I cannot set the the injector size bigger than 1500cc with the commander. I have not actually run the car car yet, as it is snowing heavily and I am still waiting for my fuel pressure regulator. My question is : Can you set the injector size to 1600cc using the commander, or do you need the datalogit software to do it?
01-11-05, 09:30 PM
#2
I live in a Museum
Join Date: Apr 2004
Location: NY, 10992
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by crepete
I just received my Power FC from Japan, and low and behold, the instructions are japanese (big surprise). I ordered the new comp because I put 1600cc injectors in the car. For some reason, I cannot set the the injector size bigger than 1500cc with the commander. I have not actually run the car car yet, as it is snowing heavily and I am still waiting for my fuel pressure regulator. My question is : Can you set the injector size to 1600cc using the commander, or do you need the datalogit software to do it?
This is the wrong section. Where is highland in New York?
01-11-05, 09:33 PM
#3
"Challenged" since 1993
Join Date: Sep 2002
Location: Columbus, Oh
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by crepete
I just received my Power FC from Japan, and low and behold, the instructions are japanese (big surprise). I ordered the new comp because I put 1600cc injectors in the car. For some reason, I cannot set the the injector size bigger than 1500cc with the commander. I have not actually run the car car yet, as it is snowing heavily and I am still waiting for my fuel pressure regulator. My question is : Can you set the injector size to 1600cc using the commander, or do you need the datalogit software to do it?
01-11-05, 09:42 PM
#5
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Highland, New York
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
a) Highland is by poughkeespsie, about 6 miles away, why do you ask? b) Sorry for posting this in the wrong section, I just figured since I had a 3rd gen it was the correct spot c) Thanks for the info.
01-29-05, 03:44 PM
#7
cost of the datalogit and software is 339 for a serial port connection to your laptop. The PFC price varies depending on the dealer, anywhere from 1100 to 1250 new from a seller. 850 from some guys in Japan.
www.rx7.com has both
Tim
www.rx7.com has both
Tim
Trending Topics
01-29-05, 05:58 PM
#8
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
Not only do you need the datalogit, but you will need the correct resistors for those injectors -- otherwise you may blow out the ignition drivers in the PFC.
01-30-05, 11:54 AM
#9
boxed in and drawn out
Join Date: Dec 2003
Location: Bayouself
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rynberg
Not only do you need the datalogit, but you will need the correct resistors for those injectors -- otherwise you may blow out the ignition drivers in the PFC.
02-01-05, 01:34 PM
#10
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Highland, New York
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rynberg
Not only do you need the datalogit, but you will need the correct resistors for those injectors -- otherwise you may blow out the ignition drivers in the PFC.
Thanks for the info. From what Keith at kgparts says, the correct resistors are 10 ohm 10 watt resistors.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM