Power FC Power FC Newbie Question -->
#1
Power FC Newbie Question -->
Hi all,
I just picked up a new Power FC ECU from a fellow forum member who decided to go in a different direction with his car (V8 conversion), hence the sale. It currently has a map for a T-78, 850/1600cc injectors, + other options, however, my car is stock (sequential twin turbos) but for a downpipe and exhaust. Needless to say, this map will not run properly on my car. I do have the Commander, and what I want to know is, how do I go about getting and loading a base map with stock parameters to get started? Is there a way to do this with the unit off the car? Thanks for any help.
I just picked up a new Power FC ECU from a fellow forum member who decided to go in a different direction with his car (V8 conversion), hence the sale. It currently has a map for a T-78, 850/1600cc injectors, + other options, however, my car is stock (sequential twin turbos) but for a downpipe and exhaust. Needless to say, this map will not run properly on my car. I do have the Commander, and what I want to know is, how do I go about getting and loading a base map with stock parameters to get started? Is there a way to do this with the unit off the car? Thanks for any help.
#2
Registered Abuser
Join Date: Sep 2001
Location: Louisville, KY
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
Did the previous owner ship you the Commander manual with the purchase? If not, then go download the pdf file from this forum and print it out. Read through it, and you'll see there's a function available on the Commander called All Data Init. That will restore the power fc back to factory default settings.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM