Power FC Power Fc...for an FC???
#1
www.v8less.com
Thread Starter
Join Date: Nov 2002
Location: Edmonton, Canada
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
Power Fc...for an FC???
is this possible?
I've heard of adapters but cannot find it or who/where sells them
It'd just be so much easier to get straight into tuning than having to rewire all the wipers/ac/etc with something like Microtech
I've heard of adapters but cannot find it or who/where sells them
It'd just be so much easier to get straight into tuning than having to rewire all the wipers/ac/etc with something like Microtech
#2
Senior Member
Join Date: Jun 2001
Location: CANADA
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
border racing adapts it to the fc.basically it will run you $2500 cdn for the unit..you may want to contact www.jt-imports.com. will need a apexi air intake temp sensor,you will also need the djetro version of the power fc so you can ditch the afm in favour of the djetro=map sensor.It basically is plug and play. You can also use the datalogit even on the powerfc for the fc3s.You will also need the boost pressure sensor harness. powerfc for fc3s is good if your ready to do some tuning on your own,not many ppl have the pfc for the fc3s,and i dont think anyone has one in canada. Im thinking about purchasing myself because of the location im in(manitoba) no support for haltech,microtech or powerfc..Even if you get it pre tuned before ordering,you would still need to get it fine tuned.Think about if you ever get a big turbo,powerfc would need to be retuned..
Hope that helps..
Hope that helps..
Last edited by DyNaMiTe KiD; 06-21-03 at 09:43 AM.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM