Power FC Forum Apex Power FC Support and Questions.

Power FC power fc boost probrams

Thread Tools
 
Search this Thread
 
Old Aug 30, 2009 | 10:22 AM
  #1  
k20a2002's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2007
Posts: 48
Likes: 0
From: canada
power fc boost probrams

so i have the power fc and i have all the support mod for the cars. the probrams that i cant boost more than 18psi . whan ever i hit 18psi i got some kind off fuel cut or boost cut . is a fuel cut or boost cut that u have to set on the power fc ?
Reply
Old Aug 30, 2009 | 11:51 AM
  #2  
arghx's Avatar
rotorhead
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Aug 2004
Posts: 16,205
Likes: 461
From: cold
go to settings--> boost , set all the boost values to 2.00 and the boost cut will be disabled. i presume you have an aftermarket boost controller here.
Reply
Old Aug 31, 2009 | 04:36 AM
  #3  
k20a2002's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2007
Posts: 48
Likes: 0
From: canada
Originally Posted by arghx
go to settings--> boost , set all the boost values to 2.00 and the boost cut will be disabled. i presume you have an aftermarket boost controller here.
yes i do has a aftermarket boost controller. r u talking about the commander or that fc dataloger
Reply
Old Aug 31, 2009 | 10:10 AM
  #4  
cewrx7r1's Avatar
Eye In The Sky
Tenured Member: 25 Years
iTrader: (2)
 
Joined: Feb 2001
Posts: 7,941
Likes: 133
From: In A Disfunctional World
You need to read page 28 of the PFC manual, the last 2 paragraphs.
Can be done with either.

Best to not run over 16-17 psi boost on the best street gas. Depends on if you have optimized water and intake cooling and tune.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
11
Nov 18, 2024 03:47 AM
streetlegal?
New Member RX-7 Technical
13
Mar 17, 2022 02:46 PM
C. Ludwig
Single Turbo RX-7's
49
Jan 30, 2019 06:31 AM
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM




All times are GMT -5. The time now is 04:50 PM.