Power FC power fc on 88 NA engine?
#1
Full Member
Thread Starter
Join Date: Nov 2007
Location: belgium
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
power fc on 88 NA engine?
Has anyone used the power fc on a 88NA engine?
Blew my turbo engine and have a na engine that i can use.
Could i use the pfc with the s5 turbo harness to run the 88Na engine?
Blew my turbo engine and have a na engine that i can use.
Could i use the pfc with the s5 turbo harness to run the 88Na engine?
#4
Yes. We have several customers running the PFC in their N/A cars. The easiest way is to run without any 5th and 6th port acuators.
I have dyno tuned one of customers with an S5 N/A running four S5 TII 550cc injectors. I reconfigured the map so that it only sees vacuum. If you end up dropping the N/A engine in, email me at tech and I can supply you with this map to get you started.
I have dyno tuned one of customers with an S5 N/A running four S5 TII 550cc injectors. I reconfigured the map so that it only sees vacuum. If you end up dropping the N/A engine in, email me at tech and I can supply you with this map to get you started.
#6
You would need to change the TPS connector to the S4. This Cosmo TPS how-to will identify the wires for you. http://banzai-racing.com/how_to_cosmo_tps.htm
Then you will want to connect the Black / Green Stripe wire (FRT) to the Green / Red Stripe (NRT) so that the PFC sees the TPS voltage in both full and narrow ranges.
Then you will want to connect the Black / Green Stripe wire (FRT) to the Green / Red Stripe (NRT) so that the PFC sees the TPS voltage in both full and narrow ranges.
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
befarrer
Microtech
3
08-22-15 05:52 PM