Hi to all

I'd like to ask if here is wiring diagram for PFC. I just pluged the PFC but it didn't work. When ignition ON or engine start the fuel pump does not send any fuel so it is not working i belive. I think everything works properly except the fuel pump. It is MY98 Subaru Impreza GT not a RX7.

any wiring diagrams for PFC?

 

We can't help you out. Two different applications, with the FD PFC you have to remove a three wires or pins from the PFC to get it to work correctly.

 

If your PFC uses the stock harness like our's does then the pinouts should be exactly the same as your stock ECU. Just find wiring diagrams for that.

 

The PFC is a plug and play unit. 3 wires of the 26pin connector need to be removed and 1 wire from the 16 pin connector needs to be removed. Since it is a plug and play using the same harness... just look up a wiring diagram for the stock fd... like what skotx said. Maybe those 4 wires that need to be pulled out are mess with the FP.

Jeremy