Power FC Passed Emissions with PFC
#1
Passed Emissions with PFC
Well i did have to play just a little with the fuel map, but it was'nt that bad.
These are the ones i changed
This is what it was stock
NO2....... NO3......NO4
P04 1.215 1.152 1.066
PO5 1.215 1.000 1.000
PO6 1.215 1.000 1.000
PO7 1.215 1.000 1.000
PO8 1.215 1.020 1.020
PO9 1.215 1.082 1.039
P10 1.215 1.102 1.129
Here is what i changed it to
NO2....... NO3......NO4
P04 1.000 1.000 1.000
PO5 1.000 1.000 1.000
PO6 1.000 1.000 1.000
PO7 1.000 1.000 1.000
PO8 1.000 1.000 1.000
PO9 1.000 1.000 1.000
P10 1.000 1.000 1.000
The only reason i changed these setting is because when i was watching the map these where the only parts that it was using. So i just took the extra fuel out.
I guess it worked.
Well now it is time to pull the motor apart and bridge port it, so this may be the last legal inspection sticker
These are the ones i changed
This is what it was stock
NO2....... NO3......NO4
P04 1.215 1.152 1.066
PO5 1.215 1.000 1.000
PO6 1.215 1.000 1.000
PO7 1.215 1.000 1.000
PO8 1.215 1.020 1.020
PO9 1.215 1.082 1.039
P10 1.215 1.102 1.129
Here is what i changed it to
NO2....... NO3......NO4
P04 1.000 1.000 1.000
PO5 1.000 1.000 1.000
PO6 1.000 1.000 1.000
PO7 1.000 1.000 1.000
PO8 1.000 1.000 1.000
PO9 1.000 1.000 1.000
P10 1.000 1.000 1.000
The only reason i changed these setting is because when i was watching the map these where the only parts that it was using. So i just took the extra fuel out.
I guess it worked.
Well now it is time to pull the motor apart and bridge port it, so this may be the last legal inspection sticker
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM