Power FC My car wont "learn" idle??? 3k idle?
#1
Full Member
Thread Starter
Join Date: Jun 2004
Location: IN
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
My car wont "learn" idle??? 3k idle?
Hey guy my car is having some issues with its idle, i have a single turbo, and all of the blockoff plates.... everytime i try to start up the car, my idle will go all the way up to 3000 rpm and not will not try to come down at all... i did cut the four wires, and i did try to reset the thing so i can "relearn" the idle again... any suggestions?
#2
R.I.P. GuitarJunkie28
Join Date: Jul 2002
Location: san francisco, ca
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
what four wires are you refering to?
actually my friend is having this same exact problem....it won't seem to learn...and it idles really funky. When u first step on the gas...it bogs a little then goes. Idle jumps a little. <shrugs> *scratches heads*
actually my friend is having this same exact problem....it won't seem to learn...and it idles really funky. When u first step on the gas...it bogs a little then goes. Idle jumps a little. <shrugs> *scratches heads*
Last edited by WONG FRIED RICE; 09-02-05 at 09:53 PM.
#3
Check you Idle Air Control valve. Section F pg 83 in the manual.
You can disconnect the connector at the valve and re-adjust your idle.
Until I can replace it. Mine was having the same problem.
You can disconnect the connector at the valve and re-adjust your idle.
Until I can replace it. Mine was having the same problem.
#4
"I see triangles"
Join Date: Apr 2003
Location: PA
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jupiter
Check you Idle Air Control valve. Section F pg 83 in the manual.
You can disconnect the connector at the valve and re-adjust your idle.
Until I can replace it. Mine was having the same problem.
You can disconnect the connector at the valve and re-adjust your idle.
Until I can replace it. Mine was having the same problem.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM