Power FC Map for single turbo 800-1600 injectors
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2006
Location: ccc
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Map for single turbo 800-1600 injectors
My single turbo build almost done and I sorted out my starting problem.
Anyone kindly enough to share a map with 800-1600 injectors running powerFc ?Just for test or maybe possible to run safely to a 5 miles away dyno shop.
Thank you.
Anyone kindly enough to share a map with 800-1600 injectors running powerFc ?Just for test or maybe possible to run safely to a 5 miles away dyno shop.
Thank you.
#3
Rotary Enthusiast
iTrader: (19)
Join Date: Apr 2002
Location: Colorado Springs, CO
Posts: 1,169
Likes: 0
Received 11 Likes
on
10 Posts
I think any map you use you will need to tune it. Even to run a few miles you will probably have to figure out how to tune it to make it run.
At least I had to with my set up.
At least I had to with my set up.
#6
Rotary Enthusiast
iTrader: (4)
Your money would be better spent joining the PFC-DL-Tuning group, you will have access to plenty of maps and all the information you need to set your car up correctly. As LOOKatme mentioned you will likely need to make adjustments to any map you load onto your PFC anyway. I believe you need to PM Arghx if you want to join.
#7
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
Any map is safe to drive as long as you do not boost over about 7 psi. That is a DOH factor.
More important than just a map for a single, is for what mods, boost range, and usage.
You are not showing us that you have he knack.
More important than just a map for a single, is for what mods, boost range, and usage.
You are not showing us that you have he knack.
Trending Topics
#9
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
Contact Steve at PRT Performance | Lewisville Performance Shop | Dallas Auto Services | Dyno Tuning .
I think this may be his shop.
I think this may be his shop.
#11
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2006
Location: ccc
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
I hit a snag....car will not start. Trying to find out why. This car sitting in the barn for a long time and maybe some humidity and mouse eating some of the wire issue. I will solve this problem but it will take a while.
By the way, another question...does powerfc bypass the oxygen sensor or still use it?
By the way, another question...does powerfc bypass the oxygen sensor or still use it?
#12
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
I hit a snag....car will not start. Trying to find out why. This car sitting in the barn for a long time and maybe some humidity and mouse eating some of the wire issue. I will solve this problem but it will take a while.
By the way, another question...does powerfc bypass the oxygen sensor or still use it?
By the way, another question...does powerfc bypass the oxygen sensor or still use it?
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Engine Management Forum
11
11-09-15 01:15 PM