JDM twins stock IC new NGK bur9eq all 4. new wires 3" DP MP and Catback.
mazda compression the motor at 8.9 8.9 both rotor. Car has the stock ecu adn runs great with about 9PSI. I want to keep everythgin stock for now injectors fuel pump and all that stuff. just need a map that will get me the best HP gain and be as safe as the factor ECU with out have problme starting when cold hot . I want to this Map to be liek the stock ecu as fast as being realiable.

Sunil517@hotmail.com

let me know how much you asking and what HP gain I can see.

PFC not install as yet.

 

You can't buy maps like you are proposing...every car is different. Start with the default map, spend your money on a wideband, and learn how to tune by reading this forum.

 

Why not just have it dyno tuned...

 

Fine the stock 1999+ base map and start with that.

Or take out 2 degree timing for (P15-P20,N15-N20), and reset all the IGT by "SPLIT" with 3 split for (P1-P13,N1-N20), and 15 split for the rest of the map.
Then add about 10% fuel to the PIM Volt table for 3.5V and higher.

Now start tuning AFRs.

Need more and better info, PM me about my notes package.

 

I ordered an Innovate AF meter. Guys said its the best one they have and it do not get install on the car it can go from car to car whick is nice because I can have friend use it if needed.

MY friend with a Haltech and another with a Microtech siad they will also help me but they never did a power FC.

I am hoping to have all this install and ready by March 18th.