Power FC Initializing power fc after mods
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Feb 2018
Location: UK
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Initializing power fc after mods
Hi guys, ill be perfectly honest im no longer an rx7 owner but have had 2 fc's and 1 fd previously. I joined this place as it seems to be the most indepth forum on apexi power fcs so was just hoping i could get some advice from the more experienced users ?
My question is as follows, i want to initialize the power fc to idle learn after some recent upgrades (gt3076 turbo and 750cc injectors)
I use fc-datalogit software at the moment.
so if i initialize the power fc , do i then turn keys on and off as prompted, then enter the settings for injector corrections, click update and then start, and it will still do the idle learn ? or because ive clicked read all = changed settings - update will it then think that is the permanent map
thanks for any help in advance
My question is as follows, i want to initialize the power fc to idle learn after some recent upgrades (gt3076 turbo and 750cc injectors)
I use fc-datalogit software at the moment.
so if i initialize the power fc , do i then turn keys on and off as prompted, then enter the settings for injector corrections, click update and then start, and it will still do the idle learn ? or because ive clicked read all = changed settings - update will it then think that is the permanent map
thanks for any help in advance
Thread
Thread Starter
Forum
Replies
Last Post
FrankV702
3rd Generation Specific (1993-2002)
16
04-30-17 11:16 PM
revnstprt
2nd Generation Specific (1986-1992)
10
02-20-06 12:41 AM