I once saw and read a post on this forum about a guy that shoots these crazy flames. When people asked he said exspensive computer and a fuel system. So not wantting to be burned on this forum I am just intrested. I have an 93' fd with all the mods, t04s, 1600cc injectors, hks twin power, and a pfc tuned by Steve Kan that put out about 385rwhp. I actually asked Steve to make me shoot flames and he said that the pfc wasn't the best ecu for that. I do shoot the ocassional pop of flame but nothing is as what i saw on the video. How do you shoot those big flames. Just to intimidate others and to show off. Thanks. Oscar

 

Not that I would ever consider doing this but if you adjusted the idle F/C settings that turn the fuel injectors back on at around 1200 rpm when you lift off the throttle, and set them to something much higher say 7000 rpm, you could rev up the motor and let off and it should flood the exhaust with fuel, mabe that would do it consistently?

 

I have heard of that but i wasn't sure if that would mess anything up. Would anyone know. To have the fuel being shoved in the motor without being burned?

 

Here you go. No need for fancy computers.
http://estore.websitepros.com/802805/Detail.bok?no=187

 

yea, change the setting that turns off the injectors when you left off, change it so that the injectors come back on at like 7000. this definitley works, not that great on gas, but does put out some big flames.

pm apexkw, he's done it before.

 

Tried it last week for a couple days and got sick of the popping and banging every time you take your foot off the gas + almost toasted my rear bumper.Try it,you can always put the settings back to original presets if you dont like it.....Watch the old folk's faces in the Camry behind you especially when your exhuast lits up a
big,loud one.

 

I did it, nothing happend.