Has anyone tried using the kit from bansai racing to adapt the 3rd gen. powerfc to the 2nd gen??

I have the rtek 1.7 right now, i want soemthing plug and play. i`m at a toss up between the 2.1 rtek and the powerfc.

 

http://www.geocities.com/arghx/PowerFC.FC3S.Tuning.doc guide

 

There are hundreds of happy S4 and S5 owners running around with the FD PFC installed with our harnesses. We just put down 435rwhp @ 15PSI in our shop vert.

http://www.banzai-racing.com/products_fc3s.htm

 

Great!! Thanks for replying. I just wanted to make sure before i dumped another large sum of cash into my 7 again.

 

the only thing I don't like about banzai's kit is that it made the PFC in a FC3S a common thing, thereby making me and my AP Engineering kit less cool. I was probably at least 3x cooler in '05 :-/

in all seriousness though, i've installed a banzai adapter kit on a friends car and it worked great

 

I have an FD pfc in my S5 with a banzai adapter, it works but you can easily run an FD ecu in an S5 without the adapter.
Just mowe some pins!
I have tryied that to but i run with injektor driver etc so i cut the kables in the adaptor insted of cutting in the ecu harness.
If you have an S4 however i wold not go without the banzai harness

 

i'm in the process of having a pfc put in my s4 now with the harness. problem is that there are no pfc's in the states right now so i have to wait for more to come in from j-pan. i'll let you know how i make out.

 

Will the FD pfc work?

 

Our adapters are specifically for use with the FD PFC

 

Do you guys sell the pfc?

 

Buy my AP Eng PFC for your car. No modifying necessary... a true plug and play. Cost $1250

https://www.rx7club.com/2nd-generation-rx-7-1986-1992-parts-194/apexi-ap-eng-pfc-w-harness-commander-sensors-boost-kit-854517/

 

His profile says he has an S4, the S5 AP will not work.

No, we do not sell Power FC's, just the kits to install them. Did you look on ebay or in the FD parts section of this forum?