Power FC FC Tune preview
12-29-07, 05:52 PM
#877
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Hello everyone,
just wanted to post a quick update.
I'm working on a low cost connector for the PFC, where low cost means below $50. The box has no analog inputs or connector for the Commander.
I've also just made this screenshot. Lets see what you guys can tell from it
Good night!
just wanted to post a quick update.
I'm working on a low cost connector for the PFC, where low cost means below $50. The box has no analog inputs or connector for the Commander.
I've also just made this screenshot. Lets see what you guys can tell from it
Good night!
12-30-07, 08:42 AM
#878
Newbie
Join Date: Dec 2007
Location: Australia
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I've also just made this screenshot. Lets see what you guys can tell from it
Good night!
Good night!
My project is a headless unit using USB Flash memory, but for different purposes and am using a customised LinkSys embedded linux h/w platform as the starting point to make the logging aspect of what I'm doing a bit cheaper and still keep it physically separate from the actual PFC interface.
12-30-07, 09:10 AM
#879
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
I think for $299 that's the perfect device for the car. The above screenshot is the actual resolution of the display.
12-30-07, 03:46 PM
#880
Full Member
iTrader: (4)
</text></svg>)
Join Date: Aug 2005
Location: Walnut
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
FastHatch.... Thanks for coming up with a more affordable solution for connecting to the PFC.... since the hardware does not have any analog input as you have mentioned... does that mean you have already implemented on the next update of FC Tune the capability to allow simultaneous analog input on more than one COM port (i.e. PFC on COM1 and wideband on COM2)?
Also, are you planning to manufacture this hardware yourself and privately sell to all those interested? or would you post instruction for putting this together so those who would like to attempt making this on own would be able to do so with your instruction?
Also, are you planning to manufacture this hardware yourself and privately sell to all those interested? or would you post instruction for putting this together so those who would like to attempt making this on own would be able to do so with your instruction?
Last edited by )EIB(; 12-30-07 at 03:52 PM.
01-03-08, 09:17 PM
#882
Newbie
Join Date: Jan 2008
Location: Thailand
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
01-07-08, 08:21 PM
#883
Avoid Fuego Racing
This is funny, I was considering making a copy of the datalogit, because it is so basic it is pathetic. So I cant justify 300 bucks for it. If you produce your cheap box, I assume you can't truly tune with it because you cant datalog without wideband inputs?
01-09-08, 04:35 PM
#885
Junior Member
Join Date: Apr 2006
Location: new york
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
fast hatch have you ever heard of this self tuning program for the apexi power fc!!
called Free program and VB6 source code for Datalogit !!
it was released over the fc datalogit yahooused group!! under is the link for the program!! they say if coded for the 1zz-fe motor!!
http://spyderchat.com/forums/index.php?showtopic=45059
It supports just the 1ZZ-FE and 2ZZ-GE platforms, but could be modified
to support others. It is jam-packed with cool features, many things
that I've seen on people's wish lists here. It is being used by quite
a few people and has been for I'd say 2 1/2 years now. I just don't
have the spare time, information, or resources to make it work with
other platform. Enjoy!
if anyone would like to read all that was told about the sofeware just respong and i will paste the rest of the chat about the program!!
fast hatch if this does not fit into your thread i will not speak about it anymore
called Free program and VB6 source code for Datalogit !!
it was released over the fc datalogit yahooused group!! under is the link for the program!! they say if coded for the 1zz-fe motor!!
http://spyderchat.com/forums/index.php?showtopic=45059
It supports just the 1ZZ-FE and 2ZZ-GE platforms, but could be modified
to support others. It is jam-packed with cool features, many things
that I've seen on people's wish lists here. It is being used by quite
a few people and has been for I'd say 2 1/2 years now. I just don't
have the spare time, information, or resources to make it work with
other platform. Enjoy!
if anyone would like to read all that was told about the sofeware just respong and i will paste the rest of the chat about the program!!
fast hatch if this does not fit into your thread i will not speak about it anymore
01-10-08, 08:58 AM
#886
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
It supports just the 1ZZ-FE and 2ZZ-GE platforms, but could be modified to support others. It is jam-packed with cool features, many things
that I've seen on people's wish lists here. It is being used by quite a few people and has been for I'd say 2 1/2 years now. I just don't have the spare time, information, or resources to make it work with other platform. Enjoy!
that I've seen on people's wish lists here. It is being used by quite a few people and has been for I'd say 2 1/2 years now. I just don't have the spare time, information, or resources to make it work with other platform. Enjoy!
I don't know under which terms and conditions the source has been released, but I encourage everyone to adapt Copilot to other models. Unfortunately I don't have any spare time left for yet another project.
01-13-08, 01:45 PM
#888
Junior Member
Join Date: Nov 2006
Location: Russia, Saint-Petersburg
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Hi FastHatch,
Can u add support for the Toyota Mark II JZX90 1jz-GTE(non VVTI). Here is the scan V3.13
I try scan in FCTune but file have 0kB size
Can u add support for the Toyota Mark II JZX90 1jz-GTE(non VVTI). Here is the scan V3.13
I try scan in FCTune but file have 0kB size
Last edited by P@shencia; 01-13-08 at 02:03 PM.
01-15-08, 08:47 PM
#890
Can i come live with you while you work on this in march? I'll be your personal slave the entire time. However i won't cook, do windows, dishes, vaccum, wash clothes, cars, or any type of washing of your property. I don't run errands either. However I will stand over your shoulder and watch your genius ooze through your fingertips into the computer. After the oozing genius process is complete, I will aid you in copying the completed program onto my thumbdrive and allow you to take me back to the airport. And you'll only have to pay my flight to your house and cover my food.
Sound reasonable? I'm Available immediately!!
Sound reasonable? I'm Available immediately!!
01-16-08, 04:01 AM
#891
Junior Member
Join Date: Sep 2007
Location: The Netherlands
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Great news there Fasthatch !
Just one thing though, no analog input on your cheapo pfc interface box ? Then how will the fc-tune software work with the wideband lambda signal ?
Regards,
William
Just one thing though, no analog input on your cheapo pfc interface box ? Then how will the fc-tune software work with the wideband lambda signal ?
Regards,
William
02-02-08, 03:36 PM
#895
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Last released version was 0.713
A first Linux version - with limited functionality though - will be released later this month.
A first Linux version - with limited functionality though - will be released later this month.
02-04-08, 06:15 AM
#897
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Germany
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Not yet, but please make a scan of your PFC and email me the file as soon as you have your Datalogit. But it may take 2 month or so till I can add support because I still have a stack of models I need to add support for.