Power FC Does any one have a base map...
Does any one have a base map...
Hi everyone it's great to be back online :-)
I have just started my car today and i'm in need of a base map to the Apexi Power FC please be kind to post it up thanks
Large Street Port Engine 0.00 miles
Turbonetic A/R 60 - .81 i think
1300cc Secondary
Walbro Fuel Pump
Fuel Pressure Regulator
Front Mount
Custom 3" all the way back Exhaust
Fluidyne radiator
upgraded fan
ACT clutch and flywheel
Now with this set-up what kind of numbers do i expect to get with 10psi or with base map
Also the fuel regulator, i notice that the stock it is located at the end of the secondary fuel line before returning to the fuel tank. Now with an after market i heard that people put it before it goes into the secondary fuel rail, so is this correct? and if you do this what do you do with the stock regulator? i have two secondary fuel rail, one on the car with stock regulator and the other without. Which one can i use if i want to go with the after market regulator?
I have just started my car today and i'm in need of a base map to the Apexi Power FC please be kind to post it up thanks
Large Street Port Engine 0.00 miles
Turbonetic A/R 60 - .81 i think
1300cc Secondary
Walbro Fuel Pump
Fuel Pressure Regulator
Front Mount
Custom 3" all the way back Exhaust
Fluidyne radiator
upgraded fan
ACT clutch and flywheel
Now with this set-up what kind of numbers do i expect to get with 10psi or with base map
Also the fuel regulator, i notice that the stock it is located at the end of the secondary fuel line before returning to the fuel tank. Now with an after market i heard that people put it before it goes into the secondary fuel rail, so is this correct? and if you do this what do you do with the stock regulator? i have two secondary fuel rail, one on the car with stock regulator and the other without. Which one can i use if i want to go with the after market regulator?
94 Single Turbo FD
Joined: May 2006
Posts: 1,418
Likes: 1
From: Calgary, Alberta, Canada
u cant put the fpr before the secondary raill.....u must have misread something their.
the base map comes with the power fc......u just have to initialize the data in order to retrieve it. but i assume u are looking for a map for your mods?
the base map comes with the power fc......u just have to initialize the data in order to retrieve it. but i assume u are looking for a map for your mods?
Ok, so the FPR is supposed to be after the sencondary fuel rail right? ok so now i'm good to go, also no i just wanted the base map that came with the ECU i don't know how to retrieve it because it was programmed for another car, so how am i suppose to retrieve it?
94 Single Turbo FD
Joined: May 2006
Posts: 1,418
Likes: 1
From: Calgary, Alberta, Canada
yes definetely after the secondary rail........the regulator is there for the purpose of keeping the hole fuel system at the desired pressured.....
to get the pfc base map go into ETC on the commander.
scroll down to ALL DATA INIT.
Then select YES in the next screen.
it well set the pfc back to the factory settings and map
your car will run like *** with the base map.
u are better of trying to get a map for your single turbo setup, injector sizes, etc
post on here and crewrx7r1 will probably help u.
to get the pfc base map go into ETC on the commander.
scroll down to ALL DATA INIT.
Then select YES in the next screen.
it well set the pfc back to the factory settings and map
your car will run like *** with the base map.
u are better of trying to get a map for your single turbo setup, injector sizes, etc
post on here and crewrx7r1 will probably help u.
Thread
Thread Starter
Forum
Replies
Last Post