Power FC Cant get the 1600's right!!!!!!!HELP!!!!!
#1
Senior Member
Thread Starter
Join Date: Sep 2003
Location: MA
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Cant get the 1600's right!!!!!!!HELP!!!!!
This is day2 now and I still can not get my car to run right with these injectors. I have the kit from rx7store, installed no problem and set my FP to 38psi. Set the trans and lag to what I found searching, and when I get to about 4000rpm the car falls on its face. I still build boost and getting 11.0-11.8 A/F, it just bounces around when I'm on it. I have try numerous maps and still the same out come. I really need help, PLEASE!!!!!
lag 0.20
pri/sec transition(%) 30
Sec transition (ms) 0.100
Overlap 7 7 4
lag 0.20
pri/sec transition(%) 30
Sec transition (ms) 0.100
Overlap 7 7 4
Last edited by NESpeed; 05-29-06 at 12:22 PM.
#3
Full Member
Join Date: Oct 2001
Location: Manchester, England
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
#4
Senior Member
Thread Starter
Join Date: Sep 2003
Location: MA
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
I was reading your post awhile before I got my fuel to get the right settings. The only thing that seemed different is that mine just keeps running like crap after 4000-to redline
lag 0.20
pri/sec transition(%) 30
Sec transition (ms) 0.100
Overlap 7 7 4
lag 0.20
pri/sec transition(%) 30
Sec transition (ms) 0.100
Overlap 7 7 4
Last edited by NESpeed; 05-29-06 at 12:34 PM.
Thread
Thread Starter
Forum
Replies
Last Post