Alright, here is my situation. I have a 1988 FC Turbo II that im using a PFC with a Banzai adapter. I've been using it for awhile now but I finally bought a AEM control solenoid valve that i can use with the boost control system on the PFC. My problem is that my old adapter does not have the 6" unterminated wire marked BC because it is to old. Now, this isn't a big deal, i can just add the pin where it needs to be. I just have no clue which pin out on the PFC unit is the correct one. I looked up a 93 rx7 wiring diagram and it has a couple pin outs for boost control.

4R - Solenoid valve (turbo control)
4S - Solenoid valve (charge relief)
4T - Solenoid valve (charge control)
4U - Solenoid valve (wastegate control)
4V - Solenoid valve (turbo precontrol)

Does anyone have any idea? or does anyone have a newer banzai adapter laying around that they can check on? I tried asking banzai directly, but they were less than helpful. Please help!

 

Reality is you were less then truthful and then acted like a baby when called out on it. Grow up, stop lying and you might just get help from the people that know the answers to your questions

4V, your welcome.

 

Thank you for your help.

Every product I have ever bought from Banzai has been more than a superb product, but i honestly think that the skirmish we had was greatly unneeded. Thanks again. Have a good day.