Power FC Boost control KIt for powerfc
#1
Full Member
Thread Starter
Join Date: Jan 2003
Location: Modesto CA
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Boost control KIt for powerfc
I have a 3 bar sensor and the apexi solenoid and everything associated with controlling boost with powerfc. I was wondering if i can just run a Profec B and sell the the boost kit or do i need anything for it. I am confused. i have a single that has a 10 psi spring and i wanna run 14-15 psi hopefully Kan can tune it. Any old threads i couldnt find much thanks.
#2
Rotary Freak
Put in the 3 bar and the profec b . Take out the apexi solenoid .Go to the pim screen on the pfc controller and find option screen . Go to option five with no offset so the 3 bar will work . If you use option 1 the car will run very badly with back firing and other bad action . For more info just call S KAN .
#3
Rotary Freak
Join Date: May 2002
Location: Houston
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
Hang on. From what I heard the two are different systems.
You can run either the Profec B, and the PowerFC, or run the PowerFC with its boost control kit.
That PowerFC is a 278 or 378 add on kit, it doesn't make sense to run both.
You can run either the Profec B, and the PowerFC, or run the PowerFC with its boost control kit.
That PowerFC is a 278 or 378 add on kit, it doesn't make sense to run both.
#4
Full Member
Thread Starter
Join Date: Jan 2003
Location: Modesto CA
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys its making more sense now, So let me get this straight the 3 bar sensor will have to be used regardless if i have a profec B or not? And also the apexi solenoid and the other little things associated can be sold right? Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
MoTeC
5
09-10-15 07:58 PM