Boost control KIt for powerfc
I have a 3 bar sensor and the apexi solenoid and everything associated with controlling boost with powerfc. I was wondering if i can just run a Profec B and sell the the boost kit or do i need anything for it. I am confused. i have a single that has a 10 psi spring and i wanna run 14-15 psi hopefully Kan can tune it. Any old threads i couldnt find much thanks.
|
Put in the 3 bar and the profec b . Take out the apexi solenoid .Go to the pim screen on the pfc controller and find option screen . Go to option five with no offset so the 3 bar will work . If you use option 1 the car will run very badly with back firing and other bad action . For more info just call S KAN .
|
Hang on. From what I heard the two are different systems.
You can run either the Profec B, and the PowerFC, or run the PowerFC with its boost control kit. That PowerFC is a 278 or 378 add on kit, it doesn't make sense to run both. |
thanks guys its making more sense now, So let me get this straight the 3 bar sensor will have to be used regardless if i have a profec B or not? And also the apexi solenoid and the other little things associated can be sold right? Thanks!
|
All times are GMT -5. The time now is 09:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands