I've saved money and am thinking about putting one of these in my car. I was gonna do a Greddy FMIC, but i figure this is the best thing to do for the car for reliability and tunability.. Can I gain good power just by the installing and tune one?

 

C'mon guys help me out. Would I be better off with a Microtech or a Hltech?

 

id contact banzai racing, for more information. my understanding is the power fc was intended for the FD. but banzai recently got it to work on their 2nd gen

 

Does the micrtech or haltech plug into the stock harness?

Tim

 

I just bought my AP engineering power fc. You can tune the car for better fuel mileage and reliabilty. I boght mine from alamo autosports.
Thanks Robert

 

Using the PFC in the FC with Banzai's method is a pretty new technique. It hasn't been documented to my knowledge how well the car will run with the FD base map on the FC. I would think the base map should be fine to start, idle, and drive around on, but I would consider it untuned as far as the boost side of the maps.

Also, the FC has 4 550cc injectors, and the FD has 2 550cc and 2 850cc injectors. I've never tried to set up the PFC's injectors for smaller secondaries, so that's another concern as well.

Dale

 

Does it have the map for the FC or is it still for the FD? How bout the injector settings? 4x550s?

 

The power fc for the fc has its own mapping. FD is different. The base map will cover the 4x550cc injectors.Thanks Robert

 

thanks that was what i was interested in.