Does any one know where i can find the full apexi power FC manual for an FD3s in english? My japanese insn't very good
the jap manual is <HERE>

I really need you help guyz.. THX

 

http://www.rx7store.net/powerfc.pdf

Is this what you are looking for?

 

Yeh I need that but i also need the instruction manual for the actual POWER FC not just the commander.. this is the link to the japanese manual http://www.apexi.co.jp/products/elec...07-0250-01.pdf

 

yes I need the same....PFC manual, not the commander.

 

Bump....Can anyone adobe acrobat a PFC manual for all us who seem to have a japanese manual or have lost theirs.....that will be sooooo helpful

 

Hmm.. That original link:

http://www.rx7store.net/powerfc.pdf

Is not working any more. Anyone care to email me the commander manual pdf, if you happen to have it?

Thanks!

Jeff Sponaugle
jsponaugle@pdxtuning.com

 

Found the PowerFC Commander manaul:

http://www.clubrx.org/manuals/apeximanuals.htm

 

The thread seems to be looking for a PFC manual----Not the Commander manual which is currently available at about a gazillion sites.

 

You can download the PowerFC manual (not the commander) straight from the source: http://www.apexi-usa.com

Click on the "Documentation" link, then scroll down to PowerFC.

Here's the direct link: http://www.apexi-usa.com/productdocu...on/powerFC.pdf

 

EXCEPT for two things

1. The manual is for a CIVIC!
2. It is just the installation manual

 

1. Doesn't matter.
2. That's all that's required. What exactly are you going to do with the PFC without the Commander?

 

You are correct that the manual is for a civic. I think the only differences are:

1) On page 2, the diagram of the harness connector is for a civic, and there is a comment about only 3 out of the 4 connectors being used. Of course, on an FD, all the connectors are used, and the sticky at the top of the forum tells you which wires to cut.

2) The diagram of the ECU location on page 8 is obviously wrong (ECU is on passenger's side for an FD).

3) I'm not sure about this but does the RX-7 idle learning procedure include turning on/off fog or headlights? The japanese version posted above shows icons of lights being turned on/off in the idle learning section.

 

Are you guys absolutely sure that the installation manual and the commander manual are the only manuals for Power FC ECUs? It seems to me I saw a very detailed manual for the the Power FC.

 

You might be right, but I thought PowerFCs were meant to be tuned by Power Excel shops, which is why the manual is so sparse. Aside from installation, I don't think the end user is supposed to do much else.

Maybe they have a special manual for these Excel tuners?

 

Yup, that's the one. It has extremely detailed information about the capabilities of the PFC along with some VERY interesting discussions of the parameters that NEED to be addressed. If I can remember where I saw it, I would get a copy for myself. Datalogits provide access to everything but I think it would be nice to know what Apexi had in mind.

 

somebody got the manual ?
i also have the japan version...

 

After reading you post, I found the manual on the Apexi USA site (yes they moved it from the previously posted URL in this thead to a new URL under their site.
Did this in less than 5 minutes.

I'll help you get with only 4 clicks from here.

http://www.apexi-usa.com/dealers_powerexcel_landing.asp

Go get It.

 

cewrx7r1 : I think i'm blind, i can't find it. i only see where dealers are.

 

That you are! Did you try SUPPORT?
When you go hunting, you really have to go hunting!

 

Anybody have the diagram of what wires to eliminate at the ecu?

 

You can find the diagram in the PowerFC FAQ PDF created by Dale Clark on page 10.

Here's the link to the thread (very useful): New version of PowerFC FAQ posted - please sticky!

Here's the link to the PDF: PowerFC FAQ