ok i just went single turbo, im running a 60-1 turbo, 1600cc secondaries 550cc primaries. what do i need to do when starting it with this ecu for the first time. i was told that i needed to cut 4 wires from the harness, all emissions, aws, and double throttle have been remove. is there anything i need to do before starting it, thanks for your help

 

The four wires do need to be cut, but removing emissions, double throttle, etc, were/are unnecessary for the PFC installation. You probably did those things to install your single turbo.

That said, you'll need a tune before you start romping on the engine with that setup, so either download one and apply it through the Datalogit or get your car to a professional who knows the PFC.

 

does anyone know who would be willing to let me get a map or at least a good base map

 

anyone?

 

You could talk to cewrx7r1 who sells a pack of PFC notes & support dirt cheap.

Because you removed the connected items, you don't need to snip your harness for the PFC. Because the stock primaries are still there, the base map probably will start & run the car.