PFS PMC HOW TO RECONNECT 3-WAY SWITCH ON PFS/EFI
#1
Full Member
Thread Starter
Join Date: Apr 2001
Location: CHICAGO, ILLINOIS, US
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
HOW TO RECONNECT 3-WAY SWITCH ON PFS/EFI
Tonight, I had a nosey-*** friend pull apart my 3-way switch (low, med & high) that was mounted inside the ashtray compartment. The white wire is still intact but the red and black wires are completely disconnected from the switch. I see two sodders where they were connected but I have no idea which wire went where. Can any of you guys tell me how to reconnect and sodder these wires back in place?
#2
Senior Member
Join Date: Mar 2001
Location: winston-salem, nc
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
#3
Full Member
Thread Starter
Join Date: Apr 2001
Location: CHICAGO, ILLINOIS, US
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info. It just so happens that Doug fron EFI got back to me this evening and instructed me on how to solder the wires back in the correct places. He also said that ANY 3-way switch would work for a replacement. Thanks again this info is useful too!
Thread
Thread Starter
Forum
Replies
Last Post
FC3S Timmy
2nd Generation Specific (1986-1992)
8
10-02-15 08:08 AM
Snook
3rd Generation Specific (1993-2002)
23
09-30-15 11:36 AM