Tonight, I had a nosey-*** friend pull apart my 3-way switch (low, med & high) that was mounted inside the ashtray compartment. The white wire is still intact but the red and black wires are completely disconnected from the switch. I see two sodders where they were connected but I have no idea which wire went where. Can any of you guys tell me how to reconnect and sodder these wires back in place?

 

http://robrobinette.com/pmc_switch.htm

------------------
silver 93
IC,DP,CB,Cold Air,etc..

 

Thanks for the info. It just so happens that Doug fron EFI got back to me this evening and instructed me on how to solder the wires back in the correct places. He also said that ANY 3-way switch would work for a replacement. Thanks again this info is useful too!