Help!! Need help finishing S4 N/A engine into gsl-se
#1
Full Member
Thread Starter
Help!! Need help finishing S4 N/A engine into gsl-se
Alright, so I bought the car as a project with hopes to get on the road ASAP. It already has the s4 N/A engine mounted. I am fighting with mounting the wheels (aftermarket, onto 5 bolt 2nd gen hubs with T2 brakes and aftermarket 2nd gen suspension), mounting oil cooler, attacking the lights, etc.
The battery is mounted in the trunk, and there are 2 wires coming from the trunk battery into the engine bay. I need to mount some wires to the starter..... what wires go where? I also have to put in the engine wiring harness..... what needs to be plugged in?
Thanks everyone.
The battery is mounted in the trunk, and there are 2 wires coming from the trunk battery into the engine bay. I need to mount some wires to the starter..... what wires go where? I also have to put in the engine wiring harness..... what needs to be plugged in?
Thanks everyone.
#2
Full Member
Join Date: Jun 2005
Location: Fort Saskatchewan, Alberta, Canada
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
your BIG wire from the back goes to the starter and the other one goes to your alt. Thats if you have a kill switch which you should if yur battery is in the trunk.
#3
Full Member
Thread Starter
Could you explain to me how to set up the "kill switch" please. It seems pretty straight forward, but I just dont want to mess up the wiring. Thanks.
Can anyone give advice on where all these wires from the wiring harness go and what sensors I have to make sure are hooked up?
Can anyone give advice on where all these wires from the wiring harness go and what sensors I have to make sure are hooked up?
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM