Originally Posted by turbodrx7
(Post 10440324)
Have you been building this thing outside in the snow?
-Austin |
Originally Posted by turbotito121079
(Post 10439913)
im looking for just 700rwhp im not going for crazy numbers in this little ass car lol.
|
well my top 3 picks are
1. proefi 2. aem v2 3. haltech platinum sport 2000 but i want to proefi because it works great with e85 it can adjust its self according to the amount of ethanol. so you only need one tune. i made 780rwhp at 22psi with a stock block 272 cams and valve train upgrade with a 80mm turbo. i cant wait to see it now twin 54mm turbos 9.5:1 compression 274 cams with more lift then the hks 272 and a fully built head and block plus 600lbs less |
7 Attachment(s)
update here is a pic of the twin turbo setup with custom 2.5 inch down pipes that i made. i also had to add waste gate ports because the manifolds were for internal waste gate setup. i made the downpipes so i can disconet the v band and take off the turbo with downpipes annd manifold all together. it will make it much easier to install and uninstall.
Attachment 716121 Attachment 716122 Attachment 716123 Attachment 716124 Attachment 716125 my welds Attachment 716126 Attachment 716127 |
1 Attachment(s)
my m&w ignition pro16 setup with AEM coils.
Attachment 716128 |
2 Attachment(s)
i got my 90 degree elbows today and welded them on. i also got the oil feeds in today and put them on tomorrow im going to take housing to get polished.
Attachment 716129 Attachment 716130 |
2 Attachment(s)
|
Nice man.
Please make video of the end result. Love 2jz's to death. |
Originally Posted by turbotito121079
(Post 10424521)
bergen county
I'm LS2 swapped. Looks like yours is coming together nicely. |
Originally Posted by sunburn
(Post 10466791)
I lived in Bergen county for like 10 years... just moved to Rockland -we have to get together and compare our beasts.
I'm LS2 swapped. Looks like yours is coming together nicely. |
Originally Posted by turbotito121079
(Post 10466797)
yea that would be cool ill let you know when im done.
|
6 Attachment(s)
ok few little updates.
i heat wrapped my downpipes and sprayed it with that black heat wrap spray. Attachment 716133 i brought 2 chrome turbo blankets Attachment 716134 i also did all my intercooler piping just waiting for my 2 new tial Q blow off valves to come in so i can weld them on and send some stuff to get polished. Attachment 716135 Attachment 716136 Attachment 716137 Attachment 716138 |
Looks amazing, man. My only gripe is that 90-degree intercooler piping elbow you got there. That's a pretty air-restrictive bend to have in the IC piping...
|
the car will still make my goal of 700 to 800rwhp with that its really not a big deal. people need to understand that certain things become restrictive at certain boost or power levels. for example a 2jzgte intake manifold starts to become restrictive at 800 850rwhp. same thing with cams turbine housing and so on thrust me when i say this is still going to be good for 800 plus horsepower before it even comes close to playing a factor or a restriction. i build my cars according to the power levels that i want. its like would you buy a weldon 2345a fuel pump thats good for 2400 hp on a 500 gas powered car. that would just be stupid. a pump that is good for 700 hp would be ideal. same thing here im am not looking for 1000rwhp+. its like taking a 13b and getting a full blown race port on stock twins. you dont need a full bolwn race port because it makes no sense. same here i dont need to replace because its not going to hurt my number or become a restriction till way after my power goal. so why do it?
|
Originally Posted by YoshiFC3S
(Post 10480253)
Looks amazing, man. My only gripe is that 90-degree intercooler piping elbow you got there. That's a pretty air-restrictive bend to have in the IC piping...
FYI, so you don't need to break out the calculator. My calculations were done to 90 lbs/min. |
7 Attachment(s)
ok i got my radiator shroud and fans in today. i also put pieced together my oil return.
Attachment 716139 Attachment 716140 i havent worked on my car for a few day i was installing a roll cage on my friends drift car. here are some pics Attachment 716141 Attachment 716142 Attachment 716143 http://i127.photobucket.com/albums/p...2-18210107.jpg Attachment 716144 Attachment 716145 now i can get back to my car.lol |
3 Attachment(s)
just got my GSC s2 cams in they are 274s cleaned up my cam gears to get ready to install tomorrow.
Attachment 716146 Attachment 716147 Attachment 716148 still waiting on my blow off valves |
you are gonna love the GSC S2 cams, but i would highly recommend not running those Venem cam gears, they only have 4 bolt tightening pattern, i have heard of these along with AEM and HKS cam gears slip timing. i would look into Titan Motorsports, Fidanza, Unorthodox Racing, Greddy or Nitto. all of these companies make a 5 bolt tightening pattern which will not slip timing
|
6 Attachment(s)
Originally Posted by Big Thumper
(Post 10494702)
you are gonna love the GSC S2 cams, but i would highly recommend not running those Venem cam gears, they only have 4 bolt tightening pattern, i have heard of these along with AEM and HKS cam gears slip timing. i would look into Titan Motorsports, Fidanza, Unorthodox Racing, Greddy or Nitto. all of these companies make a 5 bolt tightening pattern which will not slip timing
I finally got my blow off valves. Attachment 716149 i welded them on. here my welds Attachment 716150 here are some pics of them on the car Attachment 716151 Attachment 716152 here is my oil feed for the turbos with 2 filter Attachment 716153 here is the pic you asked for mk3brent Attachment 716154 |
1 Attachment(s)
Attachment 716155
It looks great, but that super huge 90-degree bend coming off the throttle body still really bothers me, man.. Did you not have any other option for routing the IC piping? |
1 Attachment(s)
well i put my car oh hold to step it up and buy a new welding machine. i was using a miller econotig but i was really limited when it cam to a/c welding. so i went and got my dream machine. it can weld on 120v and tons of functions. its the miller dynasty 200dx. tried it out this morning this thing is amazing and its only 47lbs
Attachment 716156 |
schnazzy
|
5 Attachment(s)
ok i have not done anything to the car yet been busy building stuff for people. here is a drift cage i did on a 240sx.
Attachment 716157 Attachment 716158 i made a 13b dual waste gate manifold for my friend dave Attachment 716159 Attachment 716160 Attachment 716161 i will try to reshime this week or next. if i have time |
1 Attachment(s)
here the manifold is coated
Attachment 716162 |
Originally Posted by YoshiFC3S
(Post 10497434)
It looks great, but that super huge 90-degree bend coming off the throttle body still really bothers me, man..
Did you not have any other option for routing the IC piping? do you have alzheimer's or something?
Originally Posted by turbotito121079
(Post 10516803)
here the manifold is coated
http://i127.photobucket.com/albums/p...1300131319.jpg |
All times are GMT -5. The time now is 11:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands