Yo Post Pics Of Your Old School Rides
08-24-06, 01:47 AM
#1
Yo Post Pics Of Your Old School Rides
Here is taste of what I got the rx7 is full bridged motor.GSL-SE HOUSING 12A PLATES RX2 RACING BEAT HOLLEY MANIFOLD RACING BEAT HEADERS THREE INCH EXHAUST HKS MUFFLER MSD BOX'S AND COILD AND WIRES TENZO R 18INCH RIMS THIS **** MOVES HELLA QUICK THE MOTOR HAS BEEN IN THERE FOR YEAR AND SOME CHANGE THE MILAGE ON THE MOTOR IS ABOUT 800 OR SO.
The rx duce was sporting an all motor but got thirsty for turbo so in the works is custom made manifold,custom made intake,13b gsl-se housing 12a plates 89 tubo II INTERNALS.HKS WASTE GATE custom down pipe on passanger fender soon to come,koyo race radiator and fan electric water pump front mount inter cooler man too much to list. but check the pics.
The rx duce was sporting an all motor but got thirsty for turbo so in the works is custom made manifold,custom made intake,13b gsl-se housing 12a plates 89 tubo II INTERNALS.HKS WASTE GATE custom down pipe on passanger fender soon to come,koyo race radiator and fan electric water pump front mount inter cooler man too much to list. but check the pics.
08-24-06, 08:03 AM
#2
No distributor? No thanks
iTrader: (6)
Join Date: Oct 2003
Location: Outskirts of Road Atlanta
Posts: 3,438
Likes: 0
Received 6 Likes
on
4 Posts
I like that you've shortened an SE rear. I always did like those wheels.
Here's my 74 RX-2 Coupe. SE Housings and rotating assy, some 83 12A plates and front cover, 80 5-spd trans, RB full dual exhaust, Weber 51 IDA, 82 GSL LSD, RESpeed GSL rear disc brake conversion, and a Taurus radiator fan that draws through both the radiator and oil cooler. She still needs a windshield, LF fender and lower valence and some steering items. Everything else is in the garage and going in slowly.
Here's my 74 RX-2 Coupe. SE Housings and rotating assy, some 83 12A plates and front cover, 80 5-spd trans, RB full dual exhaust, Weber 51 IDA, 82 GSL LSD, RESpeed GSL rear disc brake conversion, and a Taurus radiator fan that draws through both the radiator and oil cooler. She still needs a windshield, LF fender and lower valence and some steering items. Everything else is in the garage and going in slowly.
Last edited by Crit; 08-24-06 at 08:19 AM.
The following users liked this post:
Jasinrx2 (07-16-20)
08-24-06, 02:17 PM
#5
Former Site Sponsor
Join Date: Feb 2004
Location: Tacoma WA
Posts: 1,052
Likes: 0
Received 0 Likes
on
0 Posts
Here is our Cosmo. Just had the paint touched up and the hood area repainted, the upholstry work is next, then it goes to seven stock!!!!!!!!!!
http://www.atkinsrotary.com/index.php?pag=50-7
http://www.atkinsrotary.com/index.php?pag=50-7
08-24-06, 04:09 PM
#6
Feel the Experience
Join Date: Dec 2005
Location: Corpus Christi, TX
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
My '74 RX4. Its in good shape. I recently started some minor bodywork. I still have along way to go. I'm running an S5 13B full street port, MSD 6AL ignition, 10mm Magnacore wires, 750 holley with Racing Beat intake, Racing Beat header, an aluminum radiator for a '69 mustang (IT FIT with some help, but NO cutting anywhere) and couple of little other odds and ends.
Trending Topics
08-24-06, 06:47 PM
#8
Teddyrx2, I know that old red 79! You a thick Puerto Rican guy down in San Diego? If you owned it 4 years ago then I met you when they still had street races down there. I would also run into you and your homies at RaceLegal at Qualcomm and even kicked it after the races at Balboa park. I was a Jarhead at the time and had a gold FC. I got rid of all my FC's plus other projects so I could go all the way with the old school rotaries!
I'll post a pic of the REPU and RX2 later today but I have to host them first.
I remember you and your friends were good people. Good luck with the build!
-Vince
I'll post a pic of the REPU and RX2 later today but I have to host them first.
I remember you and your friends were good people. Good luck with the build!
-Vince
Last edited by VincenzoL; 08-24-06 at 07:11 PM.
my duce
08-24-06, 08:04 PM
#11
I dug up some old photos.
1st we have and old rx3 I had back in the day. When I got it it was just a shell, not even a roller. I used my stock pile of parts and local rotorhead sources to put it together. This was in the day before you could post a WTB thread on the web.
2nd we have one of my father's Rx3 rally cars. He started with an Rx2 when I was 12 or so.
3rd we have an old friends rally car doing what it did best.
4th is one of my first race car. Blue first gen. Before you guys dis the first gen, i think of it as almost old school. As Crit said the other day - "Dude it has been 25 years"
-billy
1st we have and old rx3 I had back in the day. When I got it it was just a shell, not even a roller. I used my stock pile of parts and local rotorhead sources to put it together. This was in the day before you could post a WTB thread on the web.
2nd we have one of my father's Rx3 rally cars. He started with an Rx2 when I was 12 or so.
3rd we have an old friends rally car doing what it did best.
4th is one of my first race car. Blue first gen. Before you guys dis the first gen, i think of it as almost old school. As Crit said the other day - "Dude it has been 25 years"
-billy
The following users liked this post:
Stanford Herman (08-03-20)
08-25-06, 12:46 AM
#17
And here's where the real time and money are going. The 72' Duece I bought off of our very own ChewieCookies here!
The only pics I have now are from the day I bought it but hopefully by next month it will already be starting it's transformation and I'll be taking it to the JCCS before it undergoes major surgery.
If you look closely you can see JCookies black 2 in the backround!
The only pics I have now are from the day I bought it but hopefully by next month it will already be starting it's transformation and I'll be taking it to the JCCS before it undergoes major surgery.
If you look closely you can see JCookies black 2 in the backround!
08-25-06, 12:53 AM
#18
I'd like to put up a pic of my friend's 4 but my computer is wiggin' out right now. This thing is crazy clean and I'm sure some of you SoCal folks have seen it in person already. Freakin' beautiful and has my old Mazdaspeed seats!
BTW: Gilbert, where you at?
BTW: Gilbert, where you at?
08-25-06, 01:01 AM
#19
Originally Posted by fchoncho
Teddyrx2, I know that old red 79! You a thick Puerto Rican guy down in San Diego? If you owned it 4 years ago then I met you when they still had street races down there. I would also run into you and your homies at RaceLegal at Qualcomm and even kicked it after the races at Balboa park. I was a Jarhead at the time and had a gold FC. I got rid of all my FC's plus other projects so I could go all the way with the old school rotaries!
I'll post a pic of the REPU and RX2 later today but I have to host them first.
I remember you and your friends were good people. Good luck with the build!
-Vince
I'll post a pic of the REPU and RX2 later today but I have to host them first.
I remember you and your friends were good people. Good luck with the build!
-Vince
You got some good taste in rides!
08-25-06, 11:31 AM
#25
Rotary Enthusiast
iTrader: (1)
Join Date: Mar 2001
Location: Sacramento, CA
Posts: 962
Likes: 0
Received 0 Likes
on
0 Posts
Some of my collection.
No real current ones of my FB, I need to take some.
tons more of the R-100:
http://pg.photos.yahoo.com/ph/mmanit...m?.dir=3580scd
Mike
No real current ones of my FB, I need to take some.
tons more of the R-100:
http://pg.photos.yahoo.com/ph/mmanit...m?.dir=3580scd
Mike