tranny question
#1
voo doo witchdoctor
Thread Starter
Join Date: Aug 2005
Location: Texarkana, Arkansas
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
tranny question
I was thinking maybe one of you repu guys might know.
i dont usually post in here cuz i own a 1st gen but my syncros are going out and i have a friend with an 87' b2200 in his yard and he is willing to let me have his transmission to replace mine but i dont know if a five speed out of one of those trucks will bolt up to a 12a.
any help would be appreciated.
-jason
i dont usually post in here cuz i own a 1st gen but my syncros are going out and i have a friend with an 87' b2200 in his yard and he is willing to let me have his transmission to replace mine but i dont know if a five speed out of one of those trucks will bolt up to a 12a.
any help would be appreciated.
-jason
#2
Banned. I got OWNED!!!
Originally Posted by rOtAryIsbEttEr
I was thinking maybe one of you repu guys might know.
i dont usually post in here cuz i own a 1st gen but my syncros are going out and i have a friend with an 87' b2200 in his yard and he is willing to let me have his transmission to replace mine but i dont know if a five speed out of one of those trucks will bolt up to a 12a.
any help would be appreciated.
-jason
i dont usually post in here cuz i own a 1st gen but my syncros are going out and i have a friend with an 87' b2200 in his yard and he is willing to let me have his transmission to replace mine but i dont know if a five speed out of one of those trucks will bolt up to a 12a.
any help would be appreciated.
-jason
You will have to use your bellhousing and grind down the front input shaft so it fits into the 12A pilot bearing.
If your car is a 1978-1980 you just have to change the shifter.
If your car is a 1981-1991 you will have to use the tail-end of your tranny on the B2200 tranny .
Driveshafts are all the same spline NA Rx7 & B2000 B2200
If someone gets lucky with a 1981-1983 B2000 tranny...you can enjoy the 4.07 first gear ... Alot better than the 3.62 first in rx7 trannies..For drag racing at least
jon
#4
Banned. I got OWNED!!!
Originally Posted by rOtAryIsbEttEr
how far will i have to grind down the input shaft though?
thanx again for the info
jason
thanx again for the info
jason
use your rx7 tranny and caliper gauge..
#7
When you put the 12a bell housing on a 86-93 b2200 tranny the input shaft will be too long. I just had it done and it does not work. I am researching input shaft modifications.
Thread
Thread Starter
Forum
Replies
Last Post