RX-4 brake upgrade
RX-4 brake upgrade
Very simple...junk that stock RX-4 front brakes and suspension.
Replace it with 81-85 front struts, stock springs and brake calipers plus Tokico blues, 1 front 1/8" shims from mazdatrix, stock FB front springs and RESpeed FB camber kit and a 1.5" lowering blocks for the rear. This is not your "mickey mouse slap it on and go" type of install. Took lots of work to find the right height that I am comfortable with. Not bouncy at all and no scraping.


Replace it with 81-85 front struts, stock springs and brake calipers plus Tokico blues, 1 front 1/8" shims from mazdatrix, stock FB front springs and RESpeed FB camber kit and a 1.5" lowering blocks for the rear. This is not your "mickey mouse slap it on and go" type of install. Took lots of work to find the right height that I am comfortable with. Not bouncy at all and no scraping.


Hello Wacky,
I see you been busy this weekend!
I got a complete GSL-SE suspension and am thinking to do the same swap this winter.
I think the struts on the 76 are shorter so am going to need bigger spacer, am still doing my research.
The car looks SWEET !
I see you been busy this weekend!
I got a complete GSL-SE suspension and am thinking to do the same swap this winter.
I think the struts on the 76 are shorter so am going to need bigger spacer, am still doing my research.
The car looks SWEET !
You dont make sense period as usual DoLuck. lemme say it in plain engrish.
the single spacer is used to even the height; a common problem with all 1st gens
thanks Andres...now get busy.. oh wait, your car is covered with that white stuff that I see on christmas cards.
the single spacer is used to even the height; a common problem with all 1st gens
thanks Andres...now get busy.. oh wait, your car is covered with that white stuff that I see on christmas cards.
Last edited by Siraniko; Nov 18, 2007 at 08:53 PM.
coz my driveway is lop sided.
I woke up late. nah, I decided to grab 81-82 GSL 3rd member at the junkyard. I was gonna swap the LSD to the RX-4 but found this in the RX-4

I woke up late. nah, I decided to grab 81-82 GSL 3rd member at the junkyard. I was gonna swap the LSD to the RX-4 but found this in the RX-4
Now I see ( put shim on your drive way J/K) Nice well there ya go.....so will the 81-82 gsl 3rd a bolt on to the rx4?
Trending Topics
Wacky, as usual, your car looks beautuful. You've achieved what I would say is THE perfect stance, both front and rear. Not too high, not too low and just the right amount of of tire tuck under the fender lip. Outstanding.
Thread
Thread Starter
Forum
Replies
Last Post
Devon300zx
2nd Generation Specific (1986-1992)
15
Sep 16, 2015 06:57 AM
Tem120
3rd Generation Specific (1993-2002)
4
Sep 7, 2015 09:53 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM




