Hey
I was wondering if anyone knew where I can get a complete breakdown of the dimensions for the rotor and rotor housing of a wankel engine
Any info would be greatly appreciated

thanks in advance

kris

 

Did you ever find this cause I need them too for an AutoCad Project.

 

Hi! i am from greece and i have 1 subject for my school. i need to find exactly dimencions of rotary engines. i need them for solid works. PLS reply

 

I dont know total engine dimension but rotor/housing dimensions are-



E=Eccentricity
R=Rotor Diameter
B=Rotor Width
Vh= rotor capacity

10A
e=15mm
R=105mm
b=60mm
Vh=491cc

13A
e=17.5mm
R=120mm
b=60mm
Vh=655cc

12A
e=15mm
R=105mm
b=70mm
Vh=573cc

13G
e=15mm
R=105mm
b=80mm
Vh=654cc


13B
e=15mm
R=105mm
b=80mm
Vh=654cc

20B
e=15mm
R=105mm
b=80mm
Vh=654cc

26B
e=15mm
R=105mm
b=80mm
Vh=654cc


21A
e=18.5mm
R=128mm
b=85mm
Vh=1046cc

22A
e=18.5mm
R=128mm
b=95mm
Vh=1169cc

15A
e=15mm
R=105mm
b=90mm
Vh=737cc

And guess for 16X is

16X
e=17.5
R=122.5
b=70
Vh=797cc

 

does anyone have any technical designs or technical drawings of rotary engine?

if anyone do and would like to help pls let me know..thanks in advance..

 

Thanks a lot toyo.For all this help.

KId contact me i see that u r from greece too.
pls sent me e mail to talk about it because i think that we have the same subject.


WHEN u are online post here smth

 

Try these 2 pdf books by Yamaguchi. You may find the measurements your looking for.

http://foxed.ca/rx7manual/manuals/RE...amoto-1971.pdf

http://foxed.ca/rx7manual/manuals/RE...amoto-1981.pdf

 

Thank you trochoid. your stuff is really helpful.

will all these i can do anything(desing them).

Thanks again. and of course...anyone else who wants to help with wankel breakdown dimensions pls......

 

thank you for the books...they will help too much...but i cann't open the file completly..do you have them like a zip file to send or something??

 

problem solved...thx anyway!!!

 

hey man sent me a private message to talk. RE sy mallon exoume tin idia ergasia na kanoume.

 

Anyone have a copy of these? Links no longer work... Actually I want to make a visual in autocad of the DKM engine but every bit helps...