got this a few months ago,thinking of doing a fuel injected halfbridge turbo,started porting motor already will post up pics as soon as i can,and also of the projects progress.

 

can't really see much. need bigger pics, but it sounds like you're going to have a nice ride when it's all said and done. i think Rx-2s are my favorite old school rotaries. i will enjoy watching you build yours.


by the way, don't be shy with pics. i'm always interested.

 

im still trying to mess with the picture sizea,hope these are a little bigger.

 

You need to post pix of the engine bay.

 

i recently got the engine bay painted about 1 week ago,cancelled out the battery tray and other little brackets to make more room for the turbo.here they are.

 

pics are much better now. lovely job on the engine bay. can't wait to see the motor.

 

Nice,

Keep us inform on the progress, that's one model car I would like to add to my stables,

a RX-2, but like all others, they are hard to find!!

Good luck on the project.

Andres

 

here are some more pictures of the epsilon wheel after i cleaned it up a bit,and another of my porting still need to take housings to get resurfaced.

 

Looks good. I heard alot of negative things about 1/2 bridges. Either full bridge or large streetport is better. Keep us updated on your progress.

 

im going to see how that works out with the halfbridge turbo 2 block,but thats only temporary to get the car going.I really want a 13b cosmo engine but thats at a later time.I already had a cosmo engine but was sold with my previous rx2 project,sold it cause it needed to much work,maybe you guys seen it in this forum (diamond in the rough)yupp.

 

EEEEEEEEEEEEEEEEEEeee............. That **** looks Tight...!!!!!!! hopefully we could be rollin around SOOOONN>>.... TAKE IT TO THE DRIVE ,,,,,,,WAY..... 20B BRO... 2 and 3.....

 

nothing special done as of yet besides the wheels getting repolished.i have been busy working on everybodys car but mine.also because im waiting on my friend to have some time at his shop so he can redo all my electrical on the car.starting tommorow im going to mock up the engine and shorten the turbo 2 trans. shifter about 4 inches so shifter sits close to the stock position,and make my own engine and trans mount,i will take pictures of all the work being done, for now here are some pics of the car as it is,nothing really different.

 

nice car...

 

today i got the shifter shortened about 4 inches here are some pics

 

nice shifter mod!!!!

 

nice

 

Nice work, keep it coming.

 

look good

 

hey nice job on the bridge! cant wait til i start porting my project is on hold now :-\

 

thanks

 

exact same thing i did years ago to put an '83 tranny in my '75 808. nice work!

 

cant wait to take ride in it!!!!

 

cya guys at R-Power bbq this afternoon.

 

thanks 4 your help dave let me know if u need help wrenching , thanks 4 all your help

 

anytime kevin,you are finally back on the road,just keep the boost low,we dont want you to blow another motor again.