mag wheels on rx2
#1
mag wheels on rx2
ill try to keep this brief.
purchased 13x7 4x110 pilones(libres) for my rx2 sedan.
rx2 sedan uses lug bolts
pilones require shanked/mag lug nuts.
shanked lug nuts that i have are too wide and the flange interferes with the spokes of the wheels before the shank gets in the wheel.
can i just put studs in and find narrower shank lugs? and how long should the studs be? the flange on the wheel is probably close to 3/4" thick
Wheel Studs
lug nuts
hopefully this makes sense. im too young to know how this problem was solved in the 70s-80s.
thanks for all your help.
purchased 13x7 4x110 pilones(libres) for my rx2 sedan.
rx2 sedan uses lug bolts
pilones require shanked/mag lug nuts.
shanked lug nuts that i have are too wide and the flange interferes with the spokes of the wheels before the shank gets in the wheel.
can i just put studs in and find narrower shank lugs? and how long should the studs be? the flange on the wheel is probably close to 3/4" thick
Wheel Studs
lug nuts
hopefully this makes sense. im too young to know how this problem was solved in the 70s-80s.
thanks for all your help.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM