mag wheels on rx2
 

ill try to keep this brief.

purchased 13x7 4x110 pilones(libres) for my rx2 sedan.

rx2 sedan uses lug bolts
pilones require shanked/mag lug nuts.
shanked lug nuts that i have are too wide and the flange interferes with the spokes of the wheels before the shank gets in the wheel.

can i just put studs in and find narrower shank lugs? and how long should the studs be? the flange on the wheel is probably close to 3/4" thick

Wheel Studs
lug nuts
hopefully this makes sense. im too young to know how this problem was solved in the 70s-80s.
thanks for all your help.

I used a set of studs from Pineapple Racing for mine

see if you can find some OE toyota alloy wheel lug nuts, and check for fitment in the wheels

thats good to hear...I have some libra's I was gettong ready to install and wasnt aware that they used different lugs