turbo_dave

iTrader: (50)

Anyone got the fsm for the 77 repu.I need the wiring diagrams for it.please someone help me out thanks.normally tach signal wire is yellow/green but this damm truck has none in that color.

rxtasy3

iTrader: (2)

u can download a copy here: http://foxed.ca/index.php?page=rx7manual

papsmagu

iTrader: (19)

on a stock 77 REPU the wire starts on the leading coil with a single wire connection (B-09). The wire is YW (Yellow White). It terminates on the back of the guage cluster. the round plug (X-08) with about 10 wires is what your looking for.

send me an e-mail and i can send you the wiring diagram.

simon@aciesconstruction.com

be careful because the 77 wiring diagram is different from other years.

Good luck

turbo_dave

iTrader: (50)

Ok thanks,I apreciate it.i did a turbo II swap and this is all i need for the electrical to be done with.now i can worry about finishing the exhaust on it and move on to the next project.

JM1FD

iTrader: (1)

That yellow/white wire comes from the coil, goes down to the emissions computer box, and *then* it goes into the cluster. I don't believe that little detour is indicated in the diagrams. I know I was surprised to see it in that connector when I went through my 77's harness a few months back.

JM1FD

iTrader: (1)

Yup. LOTS of differences in the wiring on the '77 versus the other years. Seems like they just kinda gave up when they got to the '77. The '77 compared to previous years has a harness that is far less modular, has fewer fuses in places, etc.