77 repu fsm
Anyone got the fsm for the 77 repu.I need the wiring diagrams for it.please someone help me out thanks.normally tach signal wire is yellow/green but this damm truck has none in that color.
|
u can download a copy here: http://foxed.ca/index.php?page=rx7manual
|
on a stock 77 REPU the wire starts on the leading coil with a single wire connection (B-09). The wire is YW (Yellow White). It terminates on the back of the guage cluster. the round plug (X-08) with about 10 wires is what your looking for.
send me an e-mail and i can send you the wiring diagram. simon@aciesconstruction.com be careful because the 77 wiring diagram is different from other years. Good luck |
Ok thanks,I apreciate it.i did a turbo II swap and this is all i need for the electrical to be done with.now i can worry about finishing the exhaust on it and move on to the next project.
|
That yellow/white wire comes from the coil, goes down to the emissions computer box, and *then* it goes into the cluster. I don't believe that little detour is indicated in the diagrams. I know I was surprised to see it in that connector when I went through my 77's harness a few months back.
|
Originally Posted by papsmagu
(Post 11101490)
be careful because the 77 wiring diagram is different from other years.
|
All times are GMT -5. The time now is 02:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands