I'm getting ready to put an ida in my repu. Its an early style 13B with stock porting. What size chokes, jets..etc. should I go with. Any help would be greatly appreciated.

 

http://www.mazspeed.com/carburetorfacts.htm

Weber 48IDA on street ported 13B with headers and free flowing mufflers

Venturi 38mm

Main fuel jet #190

Air Jet #160

Emulsion Tube #F-11

And do you want 5 lug or 6 lug big brake hubs for your REPU?

 

depending on the size of ur ports, but for 13-B streetports (street use), I use 3 progression holes and enlarged squirters. For jets, 70 idle jet, 210 main/160 air, 42 or 43 mm venturies and 300.

 

Thanks for the help guys and also for the PM Wacky. It has stock porting at the moment so I don't know how well its going to do. Most of the set ups I've seen with an IDA are street or bridge ported. Hey Brad, What is the lug pattern on the 5 lug brake kit going to be?

 

5 lug would be same as Turbo ][. l

 

What is the the spacing on the t][? 5 lug pattern by ?

 

5x114.3mm

We need more people interested in big brakes for REPU. If you want your REPU to stop please give feedback here so we can move forward with the kit: http://mazdarepu.com/board/viewthrea...0&pagenumber=2