Followed you over from the REPU forum. Awesome build! I just bought a 74 REPU and I'm looking to make it my winter machine/bike transporter. Few questions, did you happen to say but what are your specs on your BBS' and what model is that Brake Master Cylinder, just for my records. Also, Any thoughts on Rack and pinion conversion, the forum does not have much detail on the subject.
I'm sure i'll have a ton more questions in the near future. |
Originally Posted by vqturbo
(Post 11630662)
Followed you over from the REPU forum. Awesome build! I just bought a 74 REPU and I'm looking to make it my winter machine/bike transporter. Few questions, did you happen to say but what are your specs on your BBS' and what model is that Brake Master Cylinder, just for my records. Also, Any thoughts on Rack and pinion conversion, the forum does not have much detail on the subject.
I'm sure i'll have a ton more questions in the near future. REAR 17x10.0 ET -12 (Negative 12 offset) Brake Master Cylinder is Wilwod WIL-260-8556P - Sumit Racing or Jegs sells them Never had issues with my steering and therefore never considered the conversion. any other questions are welcome. this is the reason why i started the thread...so people can get ideas of what to do and what not to do to their REPU. Header is done all the way to the collector. Came out better than expected. I will let the pictures speak for themselves. http://i3.photobucket.com/albums/y54...psa2f301ec.jpg http://i3.photobucket.com/albums/y54...ps33533693.jpg http://i3.photobucket.com/albums/y54...ps3c187c39.jpg http://i3.photobucket.com/albums/y54...ps71c646f4.jpg Exhaust is also done http://i3.photobucket.com/albums/y54...psa7459feb.jpg |
Also got some work done over the weekend on her. Got a list of all the fuel lines and fittings required and also mocked up the coils. Coil mounting bracket will require modification
http://i3.photobucket.com/albums/y54...ps75e47be4.jpg http://i3.photobucket.com/albums/y54...ps00558897.jpg http://i3.photobucket.com/albums/y54...psc94b7de5.jpg http://i3.photobucket.com/albums/y54...ps996bb07e.jpg |
Very cool thanks! Few more questions that i didnt happen to see, Suspension mods other than the bushings/sways endlinks etc., I assume lowering blocks and brads coilovers? It doesn't look like you rolled your fenders either, is that correct? I'm looking to do a fairly aggressive pull.
I bought sodrifters REPU fyi, i saw he posted it on here too. Also, details on the interior, i.e. carpet. I apologize if you listed it before, My forum search skills has really tailed off... -Thanks again. |
Originally Posted by vqturbo
(Post 11633447)
Very cool thanks! Few more questions that i didnt happen to see, Suspension mods other than the bushings/sways endlinks etc., I assume lowering blocks and brads coilovers? It doesn't look like you rolled your fenders either, is that correct? I'm looking to do a fairly aggressive pull.
I bought sodrifters REPU fyi, i saw he posted it on here too. Also, details on the interior, i.e. carpet. I apologize if you listed it before, My forum search skills has really tailed off... -Thanks again. Carpet is stock. in really good condition. Floor mats were ordered thru LMC Carpet and modified by me with a simple patch that was ordered from E-Bay Hope that answers your questions,,.,...any more feel free to ask. |
Damn Simon, I go away from the forums for a few months and now find this! I absolutely love it. Combines the awesomeness of driving a REPU with my favorite motor. That sucker is going to fly, probably literally off the ground given the lightness of the REPU :)
Major props to you my friend. Going to bring this up to DGRR? |
seriosly awesome!
|
Originally Posted by David Hayes
(Post 11662190)
Damn Simon, I go away from the forums for a few months and now find this! I absolutely love it. Combines the awesomeness of driving a REPU with my favorite motor. That sucker is going to fly, probably literally off the ground given the lightness of the REPU :)
Major props to you my friend. Going to bring this up to DGRR?
Originally Posted by Vrythgelsewastaken
(Post 11663482)
seriosly awesome!
|
^ Sweet! Is the engine work done or did I hear it might be at Kilo's? What has or will be done to it?
|
Originally Posted by David Hayes
(Post 11663880)
^ Sweet! Is the engine work done or did I hear it might be at Kilo's? What has or will be done to it?
|
^ Very nice. I remember that engine. Brideported should be quite interesting especially in the truck. You gotta take me for a ride :)
|
so sick
|
+1
|
Looking good bro looking good .
|
Originally Posted by David Hayes
(Post 11665141)
^ Very nice. I remember that engine. Brideported should be quite interesting especially in the truck. You gotta take me for a ride :)
Originally Posted by johnnyy07
(Post 11665293)
so sick
Originally Posted by CoRDiTe
(Post 11666187)
+1
Originally Posted by chino_rx3
(Post 11666605)
Looking good bro looking good .
Man I can honestly say I have not done much to the truck. I had so much free time during Dec and Jan and chose to lay on my ass and do nothing. I have been inspired the last week or so and thought I would post and update. I know it doesn’t look like much but I am starting to see the finish line, very vaguely, but I am starting to see it nonetheless. Previous coils and coil bracket did not work out so I had to ditch that thought. Fabricated a new coil bracket and got new coils. Friend of mine told me the MSD coils that I had would not work with my computer. Did some reading and found out he is right and proceeded the get new ones. http://i3.photobucket.com/albums/y54...psdcaa91ae.jpg http://i3.photobucket.com/albums/y54...ps6a407f25.jpg http://i3.photobucket.com/albums/y54...ps0ae834d7.jpg http://i3.photobucket.com/albums/y54...psc5357be1.jpg |
Also got the fuel system done and started to wire the engine bay. Running 6 EV14’s 1000 CC injectors. Did I mention how much I hate wiring?
http://i3.photobucket.com/albums/y54...ps7994f5b4.jpg http://i3.photobucket.com/albums/y54...psaacbb223.jpg |
Nice coils, looks like she will be running pretty soon brap brap brap.
Did you get nylon braided sleeves for the harness? |
Originally Posted by BLACK MAMBA
(Post 11670992)
Nice coils, looks like she will be running pretty soon brap brap brap.
Did you get nylon braided sleeves for the harness? yes, i ordered the nyolon braided sleeves last week. According to Fedex i should receive it today. |
love it.
|
Originally Posted by blwfly
(Post 11675353)
love it.
Some more work to report. removed the engine and everything is out to get powder coated, heat coated and chromed. http://i3.photobucket.com/albums/y54...ps890ae5da.jpg http://i3.photobucket.com/albums/y54...psb69b42e6.jpg Got the cross members sanded and painted. http://i3.photobucket.com/albums/y54...ps699cac0d.jpg Installed the coil bracket and coils. http://i3.photobucket.com/albums/y54...psdf633fbb.jpg http://i3.photobucket.com/albums/y54...ps164b55bb.jpg |
Got some wiring done, using black nylon braided wire wrap. First time using this stuff and it really makes for a clean install.
http://i3.photobucket.com/albums/y54...ps686f123b.jpg http://i3.photobucket.com/albums/y54...psb643b9a8.jpg http://i3.photobucket.com/albums/y54...ps0b00106c.jpg Lastly, went to the local race track as a spectator and saw this beauty in the in parking lot. http://i3.photobucket.com/albums/y54...ps9480d0ce.jpg |
Damn. Looks great!
|
Originally Posted by mymmeryloss
(Post 11677031)
Damn. Looks great!
Got some work done over the weekend. I know it doesn’t look like much but I feel like a accomplished something. I got the bosch 044 pump installed with filter, return and feed lines. Also connected all wiring to the pump. Got the tranny tail shaft installed and sealed. Installed the water pump housing, water pump. Also, got some more wiring done but that is on hold until my new tool arrives tomorrow. Anyways, took some pics of the motor as it sits right now. I have to send the LIM out to coating as the inside face of the manifold looks like crap. Outside face is sexy that is why I took a picture of it. ahahahahahah anyways enjoy the pics. http://i3.photobucket.com/albums/y54...pse7956627.jpg http://i3.photobucket.com/albums/y54...psc6654132.jpg |
Very nice Simon! Now hurry up and get it running and put video up! Lol
|
Something is missing from that exhaust :(
|
All times are GMT -5. The time now is 04:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands