Your a FREAK! Very nice build!!!! I used to own one with a 13B St-port with Weber 48 IDA. I was all over the pavement. I know your going to be all over the block with that 3 rotor with that 4.6 diff. That is SICK!!!!
|
4 Attachment(s)
Originally Posted by mymmeryloss
(Post 11587114)
This is awesome! Sub'd
Originally Posted by engdahl
(Post 11587131)
Awesome project
Originally Posted by diabolical1
(Post 11587218)
great work so far. i really dig the N/A-Bridge-thing. should give this REPU some serious character when all is said and done. can't wait to see it complete.
Originally Posted by datfast1
(Post 11589156)
Your a FREAK! Very nice build!!!! I used to own one with a 13B St-port with Weber 48 IDA. I was all over the pavement. I know your going to be all over the block with that 3 rotor with that 4.6 diff. That is SICK!!!!
got a small update to report. The front cross member has been boxed for rigidity and that the new center cross member has also been welded in lieu of having a mechanical connection. I thought the welded connection would be much stronger and not have a chance to come loose with prolonged vibrations. Attachment 659268 Attachment 659269 Attachment 659270 Attachment 659271 |
Looks good man! A Repu will be my next, and most likely last, rotary vehicle until they come out with a new one!
|
Ok so the motor mounts are done and the motor and tranny are finally secured to the REPU and in their final position. As stated before the oil pan had to be modified. Took a GSLSE oil pan and mated it to the 20B oil pan.
http://i3.photobucket.com/albums/y54...psc88bd102.jpg http://i3.photobucket.com/albums/y54...ps86d90c4a.jpg http://i3.photobucket.com/albums/y54...psac416536.jpg The shifter hole is also complete and now resides approximately 4” further back the original location http://i3.photobucket.com/albums/y54...psd59c1ba8.jpg |
Here are some pics of the motor mounts
http://i3.photobucket.com/albums/y54...ps16375f63.jpg http://i3.photobucket.com/albums/y54...ps42ce91f6.jpg http://i3.photobucket.com/albums/y54...ps36d274f3.jpg |
Looks great!
|
Looking good Simon.
|
6 Attachment(s)
Simon,
I am glad to see the work on the repu and to see a NA 3 rotor going in her like I had planned when I owned it. I was gonna use the automatic trans as I was afraid the T2 trans would not hold the torque. Anyhow I really do miss this truck but again the color, motor, wheels, everything you have done is what I could have done! Maybe one day my dream repu can happen..... If I ever do win the lottery and build one it will be a 4 door cab, white with a 3 rotor. keep up the good work. Attached is some old pics |
hell yeah! can't wait for it to be done
|
Cool build!:nod:
Nice choice of engine.:icon_tup::gwink: |
Looks great man!
|
What rims are those?
|
Some progress to report…not much progress but some. Hopefully next week, I can get the truck back, mock everything up and send out the parts to power coating. Had a 3 to one collector made for the exhaust. Due to the REPU crossmember I thought it would be better to have it made flat rather than the typical stacked collectors.
http://i3.photobucket.com/albums/y54...psb7fdd696.jpg http://i3.photobucket.com/albums/y54...psf24e2699.jpg Also made some progress on the intake manifold. The ITB’s will sit at approximately 30 degree angle. http://i3.photobucket.com/albums/y54...ps457dfd8b.jpg http://i3.photobucket.com/albums/y54...ps9c62a8ac.jpg As I have more progress I will update the thread, for now this is all I have. |
Originally Posted by mymmeryloss
(Post 11603682)
Looks great!
Originally Posted by BLACK MAMBA
(Post 11603717)
Looking good Simon.
Originally Posted by Fire85GSLSE
(Post 11603751)
Simon,
I am glad to see the work on the repu and to see a NA 3 rotor going in her like I had planned when I owned it. I was gonna use the automatic trans as I was afraid the T2 trans would not hold the torque. Anyhow I really do miss this truck but again the color, motor, wheels, everything you have done is what I could have done! Maybe one day my dream repu can happen..... If I ever do win the lottery and build one it will be a 4 door cab, white with a 3 rotor. keep up the good work. Attached is some old pics
Originally Posted by che'srx-7
(Post 11603827)
hell yeah! can't wait for it to be done
Originally Posted by Stredrotor
(Post 11604977)
Cool build!:nod:
Nice choice of engine.:icon_tup::gwink:
Originally Posted by estevan62274
(Post 11605168)
Looks great man!
Originally Posted by 'RotaryJunkie'
(Post 11612981)
What rims are those?
|
awesome
|
I am super interested to see how the sideport N/A 20b does with ITB's. Would love to build a street friendly NA 20b one day.
|
Intake is complete and mocked up. Radiator supports complete. Monday will begin the header fabrication.
http://i3.photobucket.com/albums/y54...psaeaaefb6.jpg http://i3.photobucket.com/albums/y54...ps50aea96d.jpg http://i3.photobucket.com/albums/y54...ps1d721577.jpg |
As always, looking good bro!
|
Looks great!
|
Badass
|
HOLY F*CKBALLS!! I'm in LOOOVE!!
|
Loving the intake my kinda style,. Old skool with this look is awesome . Nice
|
Originally Posted by estevan62274
(Post 11621050)
As always, looking good bro!
Originally Posted by Copeland
(Post 11621763)
Looks great!
Originally Posted by mymmeryloss
(Post 11623295)
Badass
Originally Posted by fbse7en
(Post 11626631)
HOLY F*CKBALLS!! I'm in LOOOVE!!
Originally Posted by chino_rx3
(Post 11628295)
Loving the intake my kinda style,. Old skool with this look is awesome . Nice
Header is done all the way to the collector. Came out better than expected. I will let the pictures speak for themselves. Exhaust should be done today. http://i3.photobucket.com/albums/y54...psa2f301ec.jpg http://i3.photobucket.com/albums/y54...ps33533693.jpg http://i3.photobucket.com/albums/y54...ps3c187c39.jpg http://i3.photobucket.com/albums/y54...ps71c646f4.jpg |
Wow. What material is the header made from?
|
Looking real nice Simon, can't wait to hear the sound of that BP 20B
|
All times are GMT -5. The time now is 10:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands