Rotards doing rotarded things to rotaries
#76
Rotary Zealot!
iTrader: (8)
Do you guys want to stop by Bridgeport and I'll meet up with you?
Well.. Actually Bridgeport is a terrible meetup spot. How about the Joes parking lot on the other side of the freeway? What time would you guys be down around here?
#78
Senior Member
Join Date: Nov 2005
Location: united states
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
that sounds really good to me. Maybe we could car pool, or cruise down together. i would like to take my car but the gas milage is retarded. My bushing for my shifter is none existant and i dont have 5th gear or reverse now..SUCKS.
so we got a few tps adjustment, some carb work..can we finish my t2 swap(drivetrain)... haha just kidding.
so we got a few tps adjustment, some carb work..can we finish my t2 swap(drivetrain)... haha just kidding.
#81
Rotary Zealot!
iTrader: (8)
Hey Bob/Robert do you think we could do a catback install Saturday afternoon? My friend Diana just bought an 88' vert and then a Borla catback to install on it.
Should be easy, but I don't know if there'll be anything stupid [rusted/welded connections] if we run into that do you guys have stuff laying around for that?
Yea, still both days last I read.. But it seems most people are just picking one of the days and going. [Donno if I'll come back Sunday]
Should be easy, but I don't know if there'll be anything stupid [rusted/welded connections] if we run into that do you guys have stuff laying around for that?
Yea, still both days last I read.. But it seems most people are just picking one of the days and going. [Donno if I'll come back Sunday]
#83
Moderating the Trochoid
iTrader: (56)
Hey Bob/Robert do you think we could do a catback install Saturday afternoon? My friend Diana just bought an 88' vert and then a Borla catback to install on it.
Should be easy, but I don't know if there'll be anything stupid [rusted/welded connections] if we run into that do you guys have stuff laying around for that?
Yea, still both days last I read.. But it seems most people are just picking one of the days and going. [Donno if I'll come back Sunday]
Should be easy, but I don't know if there'll be anything stupid [rusted/welded connections] if we run into that do you guys have stuff laying around for that?
Yea, still both days last I read.. But it seems most people are just picking one of the days and going. [Donno if I'll come back Sunday]
And YES we are still planning on BOTH days. Sat. and Sun.
#84
Banned. I got OWNED!!!
iTrader: (7)
Join Date: Dec 2008
Location: Oregon
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
aw, school sucks... [Well, I hate it anyway so.. :P]
Do you guys want to stop by Bridgeport and I'll meet up with you?
Well.. Actually Bridgeport is a terrible meetup spot. How about the Joes parking lot on the other side of the freeway? What time would you guys be down around here?
Do you guys want to stop by Bridgeport and I'll meet up with you?
Well.. Actually Bridgeport is a terrible meetup spot. How about the Joes parking lot on the other side of the freeway? What time would you guys be down around here?
#85
Rookie to tha Game
iTrader: (2)
Join Date: Oct 2008
Location: Oregon
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
So far, projectkyo, thizz07, and me are meeting up at lloyd center theaters at 11 am. So far I don't think we've got a plan on way were going. we were talking about taking hwy 99 in. but I-5 has a higher speed limit 65 at parts. I'm not sure where joes is. but I'm sure projectkyo would be cool with swinging through.
#86
rice killa
iTrader: (3)
Join Date: Jan 2007
Location: Vancouver, WA
Posts: 530
Likes: 0
Received 0 Likes
on
0 Posts
ok dudes, 11am, lloyd center theaters, saturday. i will meet you there IF i can bolt on my racing beat in time... i will let you know for sure tomorrow night.
I also have gps on my phone with directions, so.... but garmin is probably better anyway.
I also have gps on my phone with directions, so.... but garmin is probably better anyway.
#87
Rotary Zealot!
iTrader: (8)
[Sorry about my grammar falling apart there.. Not sure what happened >_<]
Jinxed4dub >> 99W doesn't go to salem... And there's no reason I can think of not to take I5 all the way [ok, it's boring.. but 99W isn't really less boring, just slower and the wrong direction]
I was talking with ProjectKyo yesterday and I'm planning on trying to sync up with you guys as you go past Lake Oswego/Tualatin.. [triples the distance if I go North to Lloyd center and then South to Salem, so not doing that] As long as you guys are going close to the speed limit I shouldn't have any trouble getting with the group
#88
Senior Member
Join Date: Jun 2007
Location: Portland, OR
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I'll let her know.
[Sorry about my grammar falling apart there.. Not sure what happened >_<]
Jinxed4dub >> 99W doesn't go to salem... And there's no reason I can think of not to take I5 all the way [ok, it's boring.. but 99W isn't really less boring, just slower and the wrong direction]
I was talking with ProjectKyo yesterday and I'm planning on trying to sync up with you guys as you go past Lake Oswego/Tualatin.. [triples the distance if I go North to Lloyd center and then South to Salem, so not doing that] As long as you guys are going close to the speed limit I shouldn't have any trouble getting with the group
[Sorry about my grammar falling apart there.. Not sure what happened >_<]
Jinxed4dub >> 99W doesn't go to salem... And there's no reason I can think of not to take I5 all the way [ok, it's boring.. but 99W isn't really less boring, just slower and the wrong direction]
I was talking with ProjectKyo yesterday and I'm planning on trying to sync up with you guys as you go past Lake Oswego/Tualatin.. [triples the distance if I go North to Lloyd center and then South to Salem, so not doing that] As long as you guys are going close to the speed limit I shouldn't have any trouble getting with the group
#91
Me Wantee Da' Boostee
iTrader: (6)
So, how many 7's we expecting?
Maybe we could start a poll:
option 1: going sat
option 2: going sun
option 3: both days
--> It's easy to add a pole to an existing thread. Only the thread originator can add it under THREAD TOOLS and ADD POLL TO THREAD
I'm just trying to figure out how much Soda / Water / beer / burgers / hot dogs / buns / potato salad / BBQs / extra propane tanks / chairs to bring ... to name a few.
I ask because someone just asked me how many peeps where going to be there... LOL.. all I could say was between 5 and 50
-Chris
Maybe we could start a poll:
option 1: going sat
option 2: going sun
option 3: both days
--> It's easy to add a pole to an existing thread. Only the thread originator can add it under THREAD TOOLS and ADD POLL TO THREAD
I'm just trying to figure out how much Soda / Water / beer / burgers / hot dogs / buns / potato salad / BBQs / extra propane tanks / chairs to bring ... to name a few.
I ask because someone just asked me how many peeps where going to be there... LOL.. all I could say was between 5 and 50
-Chris
#92
Banned. I got OWNED!!!
iTrader: (7)
Join Date: Dec 2008
Location: Oregon
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
hwy 99 goes to salem, or at least woodburn. But We'll take I-5. I use to have a thing with a stripper out in salem. Took 99 out to oviod traffic on weekdays. it turns in N Pacific HWY.
#93
Banned. I got OWNED!!!
iTrader: (7)
Join Date: Dec 2008
Location: Oregon
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
1 ProjectKYO saturday
2 Derekcat ??
3 Derekats Lady friend ???
4Thizz07 ??
5 russian mob ??
6 Me Jinxed4dub Both days.
Great I'm the only one driving a first gen in the group. Looks like I'll be trying to keep up.
2 Derekcat ??
3 Derekats Lady friend ???
4Thizz07 ??
5 russian mob ??
6 Me Jinxed4dub Both days.
Great I'm the only one driving a first gen in the group. Looks like I'll be trying to keep up.
#94
Rotary Zealot!
iTrader: (8)
http://maps.google.com/maps?f=q&sour...3&ie=UTF8&z=12
No. lol.. 28min away is not to Salem ^_-
Right now it looks like Diana is coming, and Tim is coming too [they'll both be driving convertible '88s]
Also, right now I'm only planning on coming Saturday.. Probably going to have to spend Sunday working on *my* convertible [they're everywhere!!]
No. lol.. 28min away is not to Salem ^_-
Right now it looks like Diana is coming, and Tim is coming too [they'll both be driving convertible '88s]
Also, right now I'm only planning on coming Saturday.. Probably going to have to spend Sunday working on *my* convertible [they're everywhere!!]
#95
Does anyone know Josh18_2k well enough to be entrusted with a fender roller for the event? He has one, but he works on Sat. and is going to another event on Sun. We're trying to figure out how to get it transported to the Rotards event in Salem, from Portland.
Any one?
The address of the shop is 1164 Madison St. NE, 97301 Salem, or something like that. The shop is behind the building, on the south side of the building. There is a large parking lot on the east side of the building; on the east side of the east parking lot are rail road tracks tht cross Madison.
Any one?
The address of the shop is 1164 Madison St. NE, 97301 Salem, or something like that. The shop is behind the building, on the south side of the building. There is a large parking lot on the east side of the building; on the east side of the east parking lot are rail road tracks tht cross Madison.
#97
Senior Member
Join Date: Jun 2007
Location: Portland, OR
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Alright, so here is the plan. Whoever wants to meet up in portland, be there at 11:00 am. We roll out at 11:15 am sharp, so try not to be late and plan ahead if traffic is a possibility. REMEBER it's the lloyd center THEATER parking lot, so it's the one across the street from lloyd center. Look for my car because the lot is huge. There is a link to a pic of my car in my signature.
We will then meet up with Derekcat's crew at Joe's parking lot in tualatin, and leave soon after that for salem.
We will then meet up with Derekcat's crew at Joe's parking lot in tualatin, and leave soon after that for salem.
#100
Still got it.
iTrader: (2)
Does anyone know Josh18_2k well enough to be entrusted with a fender roller for the event? He has one, but he works on Sat. and is going to another event on Sun. We're trying to figure out how to get it transported to the Rotards event in Salem, from Portland.
Any one?
The address of the shop is 1164 Madison St. NE, 97301 Salem, or something like that. The shop is behind the building, on the south side of the building. There is a large parking lot on the east side of the building; on the east side of the east parking lot are rail road tracks tht cross Madison.
Any one?
The address of the shop is 1164 Madison St. NE, 97301 Salem, or something like that. The shop is behind the building, on the south side of the building. There is a large parking lot on the east side of the building; on the east side of the east parking lot are rail road tracks tht cross Madison.
if that's anything, I can't vouch for him personally, but Adam is a pretty good judge of character.