Real Dyno Day @ $45 for 2 pulls with A/F (if you have a bunghole)
Thread Starter
Joined: Feb 2002
Posts: 1,640
Likes: 2
From: Tacoma WA
Real Dyno Day @ $45 for 2 pulls with A/F (if you have a bunghole)
Ok here is the deal. If you guys want to really have a dyno day with air fuel ratio's at a good price, you have to be able to get together as a group and do this.
No more claiming to show up and only finding 2 FC's and a 240sx with a picture of a rotary engine in a magazine on the dash.
This time here's how it works. If 15 of you are really going to dyno. You'll get the $45 price. Secondly, it will be prepay before the event.
When y'all get serious, then stuff like this will become un-necessary. So I'll leave the date up to you. Some of you (me included don't have cars running right now), but in the name of rotary bonding would get something going if a date is established.
So... if a date in the next month is agreed upon, please post it to this thread or PM me. I'll make arrangements to have everything else ready.
If no date earlier than March 25 is agreed on, then March 25 will be the Dyno day.
The location will be Fairlady Motors in University Place. His dyno is quite accurate. My last run in my FC was 285 whp at 14psi. We also made 275 whp at nearly the same pressure in Wally Hojo's sled.
If you'd like to invite non rotary vehicles, they WILL count towards the goal of 15 vehicles. If we get 30 vehicles, I'll do something special for you guys (but I won't let you know till it happens).
No more claiming to show up and only finding 2 FC's and a 240sx with a picture of a rotary engine in a magazine on the dash.
This time here's how it works. If 15 of you are really going to dyno. You'll get the $45 price. Secondly, it will be prepay before the event.
When y'all get serious, then stuff like this will become un-necessary. So I'll leave the date up to you. Some of you (me included don't have cars running right now), but in the name of rotary bonding would get something going if a date is established.
So... if a date in the next month is agreed upon, please post it to this thread or PM me. I'll make arrangements to have everything else ready.
If no date earlier than March 25 is agreed on, then March 25 will be the Dyno day.
The location will be Fairlady Motors in University Place. His dyno is quite accurate. My last run in my FC was 285 whp at 14psi. We also made 275 whp at nearly the same pressure in Wally Hojo's sled.
If you'd like to invite non rotary vehicles, they WILL count towards the goal of 15 vehicles. If we get 30 vehicles, I'll do something special for you guys (but I won't let you know till it happens).
Last edited by Dr. IfTeR; Mar 1, 2006 at 03:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
