The FD Restoration - $$$$ Damnit
#853
Was working on the driver side Sparco seat mount. I was trying to integrate the stock rails, but the seat height was too high, which defeated the main purpose of getting the seat. So I am now in process of making a sold mount setup.
Plus I gotta find my break in power to my EDFC unit.....
And tonight I will be going on the dyno again.
Peace
Plus I gotta find my break in power to my EDFC unit.....
And tonight I will be going on the dyno again.
Peace
Last edited by afgmoto1978; 07-22-08 at 12:43 PM.
#855
Manlaw hater
iTrader: (2)
Join Date: Feb 2006
Location: Portland, OR
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
got some pictures of the medford meet with a few of yours near the last page http://mouabros.com/gallery2/main.php?g2_itemId=1742
#856
Thanks Seth, and thanks for letting me use your sign in, that guy was testing me during the tech inspection, hehe. Let me know if you need anything made for your FD.
Second dyno run done, ran out of time again, but I was able to achieve 400 whp and 300 ft-lbs, the profile is similar to the last one. Also played with the preload of the synapse wg and the boost comes in sooner, still need to work on it to getting it to be more stable up top though. Second gear is about useless at full throttle now.
I also found my passenger side engine oil leak... it's the rear oil injector will fix that today. If I can find the electrical issue on the EDFC I will revert back to manual adjustment.
Second dyno run done, ran out of time again, but I was able to achieve 400 whp and 300 ft-lbs, the profile is similar to the last one. Also played with the preload of the synapse wg and the boost comes in sooner, still need to work on it to getting it to be more stable up top though. Second gear is about useless at full throttle now.
I also found my passenger side engine oil leak... it's the rear oil injector will fix that today. If I can find the electrical issue on the EDFC I will revert back to manual adjustment.
Last edited by afgmoto1978; 07-23-08 at 12:23 PM.
#859
Manlaw hater
iTrader: (2)
Join Date: Feb 2006
Location: Portland, OR
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
well I think jason (not the real Seth W) is going to the dark side on his FD but I'm sure he could use a hand at some point or another along the way. Anyway it was cool seeing your car out their it's nice to put faces to cars, I may swing out the the mazda/historic races this weekend. the cars not that low key so if you see it I'll be their.
#861
SO I was able to finish the Sparco seat mount and assembly at 11:30 am Friday. 4 hours before the start of the Mazda GP Time Attack practice. All in all it turned out perfect as far as seating position and what not.
The seats not crooked, the seat cover is just off.
I moved the hatch/gas door lever assembly back a half inch and it clear the seat amazingly.
The seats not crooked, the seat cover is just off.
I moved the hatch/gas door lever assembly back a half inch and it clear the seat amazingly.
#864
Full Member
Join Date: Aug 2005
Location: portland.or
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Nice.
LOL Like the turn 12 spin out pic . What happened ?
What times were you running ?
How many cars were there total and how many in your class ?
So did you win any cash ?
LOL Like the turn 12 spin out pic . What happened ?
What times were you running ?
How many cars were there total and how many in your class ?
So did you win any cash ?
#867
Full Member
Join Date: Aug 2005
Location: portland.or
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Wierd now that you said that it looks like turn 5 by that pic. So you came in hot out of 4b into 5 and how in the hell you go off in 6 ?
They were using the chicane or are my #'s off
They were using the chicane or are my #'s off
#868
http://www.portlandraceway.com/index...d=25&Itemid=45
No that's 4a, like I said earlier I went in way too hot. I did a pirouette to the left at the exit of 6. Actually, after reruning my runs in my head I spunout at 6 twice and 4a only once. Well, I almost spunout at 4a three more times but was able to save it those times.
No that's 4a, like I said earlier I went in way too hot. I did a pirouette to the left at the exit of 6. Actually, after reruning my runs in my head I spunout at 6 twice and 4a only once. Well, I almost spunout at 4a three more times but was able to save it those times.
#869
Senior Member
Join Date: Jan 2005
Location: Portland,oregon
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Hey tank slapper, where is the video? You had it in the car! Good job. I told you that you could be two seconds a lap faster than me if you had taken me up on my modification!
#870
The Driving Sports Videograph has it. He's said it will take at least a week to have it edited.
Remind me what modification was that?
The video you have on your camera from the stands was pretty cool, especially with all you guys cheering. Get yourself a replacement down load cable. I want a copy of what you got. My car sounds sick at the exit of 12!!
Remind me what modification was that?
The video you have on your camera from the stands was pretty cool, especially with all you guys cheering. Get yourself a replacement down load cable. I want a copy of what you got. My car sounds sick at the exit of 12!!
#871
Full Member
Join Date: Aug 2005
Location: portland.or
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
http://www.portlandraceway.com/index...d=25&Itemid=45
No that's 4a, like I said earlier I went in way too hot. I did a pirouette to the left at the exit of 6. Actually, after reruning my runs in my head I spunout at 6 twice and 4a only once. Well, I almost spunout at 4a three more times but was able to save it those times.
No that's 4a, like I said earlier I went in way too hot. I did a pirouette to the left at the exit of 6. Actually, after reruning my runs in my head I spunout at 6 twice and 4a only once. Well, I almost spunout at 4a three more times but was able to save it those times.
#873
Senior Member
Join Date: Jan 2005
Location: Portland,oregon
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Don't you watch NASCAR? Goes something like this... "The Apex Restoration car was really good today......"
Hey Adam, your car looked sweet with those graphics! Who did that for you? Seems like they were well thought out and took a long time to put them on. Maybe other people would like to know where you got those bad *** graphics!
Hey Adam, your car looked sweet with those graphics! Who did that for you? Seems like they were well thought out and took a long time to put them on. Maybe other people would like to know where you got those bad *** graphics!
#874
I don't know, with as big an ego as you have you would have just weighed down the FD and gotten a slower time.
I did do the "The Apex Restoration car was really good today......" interview at the winners circle, and everybody I talked to who's interested I tell them you guys did it. Don't worry I'm representin fool.
I did do the "The Apex Restoration car was really good today......" interview at the winners circle, and everybody I talked to who's interested I tell them you guys did it. Don't worry I'm representin fool.
#875
Jelly McFish
Join Date: Sep 2007
Location: Portland oregon
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Moose Knuckle Racing. Can't wait to get my car wrapped!
Sputnik wins..... so that means Adam is Laika or the monkey
In communist Russia, Apex seal blows you!
Sputnik wins..... so that means Adam is Laika or the monkey
In communist Russia, Apex seal blows you!
Last edited by NinjaGUYdan; 08-02-08 at 10:36 AM. Reason: better