so anyone wanna come help me figure my no start issue out? trying to get my red car to start again but its a no go, pretty much floods right out, has spark fuel and compression....wtf

 

I don't know if I could help, but more info on your setup etc. would probably get more replies.
make/model
fuel pump
fpr
tubo/na
ignition
etc.

 

a1000 fuel pump and regulator -10line from tank to pump, -8line from pump to yblock, -6line from yblock to rails, regulator and back to tan, 1600cc secondarys, 720cc primarys, garrett gt40 turbo, twin tial 44mm wastgates, apexi powerFC standalone, Fd uim, cars a 89 TII.

 

anybody wanna tinker with it with me this weekend?

 

i'd look at the crank angle sensor, or whatever tells the ecu that the engine is spinning in these cars. i'm still pretty new to rotaries. maybe a bad sensor, or corroded/broken wires.

 

is this car tuned for that fuel setup?

 

i have the base map banzai racing sent me to run the car, have a gt40 tuned map that i was gonna use for another base. i also made a map thats a combination of the 2. any of them should "start" the car. + the folder of maps on my desktop.

just trying to get it to start and run so that it can get a proper tune. im thinking its down to a timing issue now.

 

Maybe a injector is stuck open?