Tranny ???????s
#1
Junior Member
Thread Starter
Join Date: Nov 2008
Location: marietta
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Tranny ???????s
Just got an fc but having a little trouble with the transmission, In first its ok but then on the clutch feels like its slipping, what would you guys recomend just changing the clutch or rebuild, or swap?
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 109 Likes
on
92 Posts
Need more info.
Is the clutch actually slipping? For example, if you are in 4th at low RPM and then stab the throttle, does the tach shoot up and the car not increase in speed?
Is the clutch actually slipping? For example, if you are in 4th at low RPM and then stab the throttle, does the tach shoot up and the car not increase in speed?
#6
Racing is life!
iTrader: (2)
Join Date: Jan 2003
Location: Grapevine, TX
Posts: 2,173
Likes: 0
Received 0 Likes
on
0 Posts
What Aaron said. Time for a clutch job. Lots of threads about it. If you need to replace the pilot bearing look that up as it's especially fun
If it were my car I would replace the entire clutch system, unless it's been done. Clutch master and slave. They make a pretty nice braided slave cylinder hose. http://www.mazdatrix.com/f-hydral.htm
Good luck with the 7.
If it were my car I would replace the entire clutch system, unless it's been done. Clutch master and slave. They make a pretty nice braided slave cylinder hose. http://www.mazdatrix.com/f-hydral.htm
Good luck with the 7.
Trending Topics
#8
Junior Member
iTrader: (1)
Join Date: Nov 2008
Location: Bay Area
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
yea do what aaron and others said
also
make sure that the clutch doesn't stay partially engaged when pedal depressed.
there should be little bit of free play in the pedal, maybe 1/2 inch or so.
do the clutch job and see what happens, inspect clutch hydraulics while you at it.
also
make sure that the clutch doesn't stay partially engaged when pedal depressed.
there should be little bit of free play in the pedal, maybe 1/2 inch or so.
do the clutch job and see what happens, inspect clutch hydraulics while you at it.
Thread
Thread Starter
Forum
Replies
Last Post
ricardo.benin
3rd Generation Specific (1993-2002)
3
09-23-15 10:08 AM