tap water in coolant!!!
as everyone has said replace all the fluids. flush the water system out. i would drop a bit of oil in the spark plug holes and turn the mota over by hand a few times without the plugs in to get some oil on the seals and when you eventually try to start it put warm plugs in make sure you have enough juice from the battery or maybe even get some booster cables from a running car to turn it over quickly enough.
good luck with it
good luck with it
as everyone has said replace all the fluids. flush the water system out. i would drop a bit of oil in the spark plug holes and turn the mota over by hand a few times without the plugs in to get some oil on the seals and when you eventually try to start it put warm plugs in make sure you have enough juice from the battery or maybe even get some booster cables from a running car to turn it over quickly enough.
good luck with it
good luck with it
Thanks for all of the comments guys, with regard to warm plugs, I remember trying to start it a year ago and probably 3 times I took out the plugs, cleaned them and then heated them ALOT with a gas blowtorch....bloody thing still didn't work!!
However when it comes to it I will try again....
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
7
Sep 19, 2015 07:13 PM
Farkel
3rd Generation Specific (1993-2002)
4
Sep 16, 2015 06:16 PM
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
Sep 11, 2015 03:29 PM




